Purchase IDTQS74FCT2541T, In-stock IDTQS74FCT2541T From SeekIC.


Part Number: IDTQS74FCT2541T
Description: The IDTQS74FCT2541T is an 8-bit buffer/line driver with 3-state outputs and a 25 resistor output , ide...


Description: The IDTQS74FCT2541T is an 8-bit buffer/line driver with 3-state outputs and a 25 resistor output , ide...
The IDTQS74FCT2541T is an 8-bit buffer/line driver with 3-state outputs and a 25 resistor output , ideal for driving transmission lines and reducing system noise. The 2540 series parts can replace the 540 series to reduce noise in an existing design. All inputs have clamp diodes for undershoot noise suppression. All outputs have ground bounce suppression. Outputs will not load an active bus when Vcc is removed from the device.
|
Symbol |
Description |
Max |
Unit |
|
VTERM |
Terminal Voltage with Respect to GND |
0.5 to +7 |
V |
|
TSTG |
Storage Temperature |
65 to +150 |
°C |
|
IOUT |
DC Output Current Max Current Sink/Pin |
+120 |
mA |
|
IIK |
Input Diode Current, VIN < 0 |
-20 |
mA |
|
IOK |
DC Output Current, VOUT < 0 |
-50 |
mA |
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDTQS74FCT2541T
PDF/DataSheet Download








