Features: • Normally Open, Single Pole Single Throw Operation• Control 400 VAC or DC Voltage• Switch 100 mA Loads• Low ON-Resistance• dv/dt, > 500 V/ms• Input and Output Isolation Voltage, 2500 V RMS• Current Limiting• Low Profile: Thickness=0.080...
IL356: Features: • Normally Open, Single Pole Single Throw Operation• Control 400 VAC or DC Voltage• Switch 100 mA Loads• Low ON-Resistance• dv/dt, > 500 V/ms• Input ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The IL356 is a single pole single throw (SPST), normally open (NO), solid state relay. The relay can control AC or DC loads currents up to 100 mA, with a supply voltage up to 400 V. The device is packaged in a eight pin 2 mm surface mount package. This package offers an insulation dielectric withstand of 2500 VRMS.
The coupler of the IL356 consists of an AlGaAs LED that is optically coupled to a dielectrically isolated photodiode array which drives two series connected high voltage MOS transistors. The typical ON-Resistance is 25 W at 25 mA lead current and is linear up to 50 mA. The incremental resistance of the IL356 drops to less than 20 W beyond 50 mA while reducing internal power dissipation at high load currents. There is built-in current limiting circuitry in the detector chip.