MFG:VishaySemicond Package Cooled:N/A D/C:03+
MFG: VishaySemicond
Package Cooled: N/A
D/C: 03+
Description: The ILD3/ ILQ3 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN photo...
The ILD3/ ILQ3 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistors. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and output. The ILD3/ ILQ3 are especially designed for driving medium-speed logic and can be used to eliminate troublesome ground loop and noise problems.
Also these couplers can be used to replace relays and transformers in many digital interface applications such as CTR modulation. The ILD3 has two isolated channels in a single DIP package and the ILQ3 has four isolated channels per package.
| Parameter | Test condition | Symbol | Value | Unit |
| Reverse current | VR | 6.0 | V | |
| Forward continuous current | IF | 60 | mA | |
| Surge current | IFSM | 2.5 | A | |
| Power dissipation | Pdiss | 100 | mW | |
| Derate linearly from 25 °C | 1.3 | mW/°C |
ILQ3
PDF/DataSheet Download
Optocoupler, Phototransistor Output (Dual, Quad Channel) ILQ2-X009
The ILQ2 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and ou...
Optocoupler, Phototransistor Output (Dual, Quad Channel) ILQ1-X009
The ILD/Q1615 are multi-channel 110 rated phototransistor optocouplers that use GaAs IRLED emiters and high gain NPN phototransistors. ILQ1615 are constructed using over/under leadframe optical coupling and double molded insulation technology resulting a wi...
The ILD/Q1/2/5 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input ...
ILQ 66 are optically coupled isolators employing Gallium Arsenide infrared emitters and silicon photodarlington detectors. Switching can be accomplished while maintaining a high degree of isolation between driving and load circuits, with no crosstalk between...
Price: 0.1-2.5 USD
resistors, ROHS, ZH-269A-005
Price: 8.6-16.8 USD
FPGA, 256-FBGA, –0.5 to 1.8V
Price: 1.45-1.95 USD
Single-Chip 8-Bit Microcontroller, 44PLCC, 2.7 V ~ 5.5 V, P80C32SBAA, Philips
Price: 18-30 USD
Field-Programmable Gate Array, 208PQFP, –0.5 to 1.32 V, state-of-the-art Virtex-II technology
Price: 1-1 USD
2/2.5A BIPOLAR STEPPER MOTOR DRIVE MODULES
Price: 0.8-1.5 USD
SiGe HBT MMIC Amplifier, 4500 MHz, 50 Ohm, 150 mA, 6 V, SGA-6289Z
Price: 2.36-3.25 USD
QFP-64, TSUM16AR-LF-1, MStar Semiconductor Inc. , Integrated Circuits (ICs)
Price: 1.1-1.25 USD
Dual-Channel Digital Isolator, SOP, Low power operation, 5V, High temperature operation
Price: 1.5-16 USD
D/A converter, DIP, -0.3V, +17V
Price: 0.1-5 USD
PolySwitch surface-mount device, 33V, 1.8A, SMD, RoHS compliant, Low resistance
Price: 0.55-0.74 USD
5A, Compound Gate Driver, 8-SOIC, National Semiconductor
Price: 0.35-0.45 USD
IC driver, half bridge, 600V, 8SOIC, Internal set deadtime, 1.0W, Floating channel
