IP113MLF

IP113M LF can be a 10/100BASE-TX to 100BASE-FX converter with an SMI port for management. It consists of a 2-port switch controller, a fast Ethernet transceiver and a PHY for 100BASE-FX. The transceivers in IP113M LF are designed in DSP approach with advance 0.25um technology; this results in high noise immunity and robust performance.
 
IP113M LF not only supports store and forward mode, it also supports modified cut through mode and pure converter mode for low latency data forwarding. IP113M LF can transmit packet(s) up to 1600 bytes to meet requirement of extra long packets.
 
IP113M LF supports remote management function. IP113M LF supports remote access functions and it also supports remote monitor and loop back test function defined in TS-1000 spec (*). Local IP113M LF can access the MII registers of remote IP113M LF by programming local IP113M LF's MIIregisters via SMI connection. IP113M LF implements the management function using the maintenance frame defined in TS-1000 spec.
 
IP113M LF supports IEEE802.3x, collision base backpressure, and various LED functions, etc. These functions can be configured to fit the different requirements by feeding operation parameters via EEPROM interface or pull up/down resistors on specified pins.