IPS0151S

Series: -
Input Type: Non-Inverting
Number of Outputs: 1
Mounting Type: Surface Mount
Type: Low Side
Packaging: Tube
Operating Temperature: -40°C ~ 150°C
Manufacturer: International Rectifier
Package / Case: TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package: D2PAK
On-State Resistance: 20 mOhm
Current - Peak Output: 45A
Current - Output / Channel: 3.8A
Voltage - Supply: 4 V ~ 6 V


Features:

• Over temperature shutdown
• Over current shutdown
• Active clamp
• Low current & logic level input
• E.S.D protection


Pinout




Specifications

Symbol	Parameter	Min.	Max.	Units	Test Conditions
Vds	Maximum drain to source voltage	-	47	V
Vin	Maximum Input voltage	-0.3	7
Iin, max	Maximum IN current	-10	+10	mA
Isd cont.	Diode max. continuous current rth=62/W IPS0151	-	2.8	A
	rth=5/W IPS015135	-	35		TO220 free air
	rth=80/W IPS0151S	-	2.2		TO220 with Rth=5oC/W
Isd pulsed	Diode max. pulsed current (1)	-	45		SMD220 Std footprint
Pd	Maximum power dissipation(1) (rth=62/W) IPS0151	-	2	W
	(rth=80/W) IPS0151S	-	1.56
ESD1	Electrostatic discharge voltage (Human Body)	-	4	kV	C=100pF, R=1500Ω,
ESD2	Electrostatic discharge voltage (Machine Model)	-	0.5		C=200pF, R=0Ω, L=10µH
T stor.	Max. storage temperature	-55	150
Tj max.	Max. junction temperature	-40	+150
Tlead	Lead temperature (soldering, 10 seconds)	-	300

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to SOURCE lead. (T_Ambient = 25 unless otherwise specified). PCB mounting uses the standard footprint with 70 µm copper thickness.


Description

The IPS0151S are fully protected three terminal SMART POWER MOSFETs that feature over-current, over-temperature, ESD protection and drain to source active clamp.These devices combine a HEXFET® POWER MOSFET and a gate driver. They offer full protection and high reliability required in harsh environments. The driver allows short switching times and provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165 or when the drain current reaches 35A. The device restarts once the input is cycled. The avalanche capability of the IPS0151S is significantly enhanced by the active clamp and covers most inductive load demagnetizations.

Parameters:

Technical/Catalog Information	IPS0151S
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Package / Case	D²Pak, TO-263 (6 leads + tab)
Mounting Type	Surface Mount
Type	Low Side
Voltage - Supply	4 V ~ 6 V
On-State Resistance	20 mOhm
Current - Output / Channel	3.8A
Current - Peak Output	45A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IPS0151S IPS0151S