IR2106

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Number of Outputs: 2
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Packaging: Tube
Number of Configurations: 1
Operating Temperature: -40°C ~ 125°C
Input Type: Non-Inverting
Supplier Device Package: 8-DIP
High Side Voltage - Max (Bootstrap): 600V
Manufacturer: International Rectifier
Voltage - Supply: 10 V ~ 20 V
Current - Peak: 200mA
Configuration: High and Low Side, Independent
Delay Time: 180ns


Features:

• Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune
• Gate drive supply range from 10 to 20V (IR2106(4))
• Undervoltage lockout for both channels
• 3.3V, 5V and 15V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5V offset.
• Lower di/dt gate driver for better noise immunity
• Outputs in phase with inputs (IR2106)


Pinout




Specifications

Symbol	Definition		Min.	Max.	Units
VB	High Side Floating Supply Voltage		-0.3	625	V
VS	High Side Floating Supply Offset Voltage		VB - 25	VB + 0.3
VHO	High Side Floating Output Voltage		VS - 0.3	VB + 0.3
VCC	Low side and logic fixed supply voltage		-0.3	25
VLO	Low Side Output Voltage		-0.3	VCC + 0.3
VIN	Logic input voltage		VSS - 0.3	VSS + 10
VSS	Logic ground (IR21064 only)		VCC - 25	VCC + 0.3
dVs/dt	Allowable Offset Supply Voltage Transient		-	50	V/ns
PD	Package Power Dissipation @ TA +25°C	(8 Lead DIP)	-	1.0	W
		(8 Lead SOIC)	-	0.625
		(14-lead PDIP)	-	1.6
		(14-lead SOIC)	-	1.0
RJA	Thermal Resistance, Junction to Ambient	(8 Lead DIP)	-	125	/W
		(8 Lead SOIC)	-	200
		(14-lead PDIP)	-	75
		(14-lead SOIC)	-	120
TJ	Junction Temperature		-	150
TS	Storage Temperature		-55	150
TL	Lead Temperature (Soldering, 10 seconds)		-	300

Description

The IR2106 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel of the IR2106 can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.

Parameters:

Technical/Catalog Information	IR2106
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	High and Low Side, Independent
Voltage - Supply	10 V ~ 20 V
Current - Peak	200mA
Delay Time	180ns
Package / Case	8-DIP (300 mil)
Packaging	Tube
Number of Outputs	2
Input Type	Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR2106 IR2106