IR2302

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Number of Outputs: 2
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Packaging: Tube
Number of Configurations: 1
Input Type: Non-Inverting
Configuration: Half Bridge
Operating Temperature: -40°C ~ 150°C
Supplier Device Package: 8-DIP
High Side Voltage - Max (Bootstrap): 600V
Manufacturer: International Rectifier
Current - Peak: 200mA
Delay Time: 750ns
Voltage - Supply: 5 V ~ 20 V


Features:

• Floating channel designed for bootstrap operation
   Fully operational to +600V
   Tolerant to negative transient voltage
   dV/dt immune
• Gate drive supply range from 5 to 20V
• Undervoltage lockout for both channels
• 3.3V, 5V and 15V input logic compatible
• Cross-conduction prevention logic
• Matched propagation delay for both channels
• High side output in phase with IN input
• Logic and power ground +/- 5V offset.
• Internal 540ns dead-time
• Lower di/dt gate driver for better noise immunity
• Shut down input turns off both channels
• 8-Lead SOIC also available LEAD-FREE (PbF).


Pinout




Specifications

Symbol	Definition		Min.	Max.	Units
VB	High side floating absolute voltage		-0.3	625	V
VS	High side floating supply offset voltage		VB - 25	VB + 0.3
VHO	High side floating output voltage		VS - 0.3	VB + 0.3
VCC	Low side and logic fixed supply voltage		-0.3	25
VLO	Low side output voltage		-0.3	VCC + 0.3
VIN	Logic input voltage (IN & SD)		COM - 0.3	VCC + 0.3
dVS/dt	Allowable offset supply voltage transient		-	50	V/ns
PD	Package power dissipation @ TA +25	(8 Lead PDIP)	- -	1.0 0.625	W
		(8 Lead SOIC)
RthJA	Thermal resistance, junction to ambient	(8 Lead PDIP)	- -	125 200	/W
		(8 Lead SOIC)
TJ	Junction temperature		-	150
TS	Storage temperature		-50	150
TL	Lead temperature (soldering, 10 seconds)		-	300

Description

The IR2302(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction.

The logic input of the IR2302 is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.

Parameters:

Technical/Catalog Information	IR2302
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	Half Bridge
Voltage - Supply	5 V ~ 20 V
Current - Peak	200mA
Delay Time	750ns
Package / Case	8-DIP (300 mil)
Packaging	Tube
Number of Outputs	2
Input Type	Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 150°C
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR2302 IR2302