IR3220S

Series: -
Input Type: Non-Inverting
Mounting Type: Surface Mount
Current - Output / Channel: 2A
Type: H Bridge
Number of Outputs: 4
Packaging: Tube
Operating Temperature: -40°C ~ 150°C
Package / Case: 20-SOIC (0.295", 7.50mm Width)
Supplier Device Package: 20-SOIC (Wide)
Manufacturer: International Rectifier
On-State Resistance: 11 mOhm
Current - Peak Output: 15A
Voltage - Supply: 8 V ~ 28 V


Features:

Programmable PWM In-rush Current Limitation (e.g 18A)
6 A Continuous Current Capability without Heat Sink (2 x 13 m)
Over-Temperature (165 °C) and Over-Current (30A) Protections
20 kHz PWM Oscillator Embedded
Low & High Frequency Switching Operation (self adaptive dead-time)
Easy Speed / Torque Control (analog duty cycle input)
Braking / Non-Braking Modes
Sleep Mode (braking) for Automotive Actuator


Specifications

Symbol	Parameter	Min.	Max.	Units
Vm1 (2) Vin1 (2) Vcc/gnd	Maximum M1 (M2) voltage (active clamp) Maximum IN 1 (IN 2) voltage Maximum Vcc pin to GND pin voltage	Vcc-37 -0.3 -0.3	Vcc+0.3 5.5 45	V
I in1 (2)	Maximum IN1 (IN 2) current	-1	10	mA
Vg1 (2) Vss Vrc	Maximum Gate 1 ( Gate 2 ) voltage Maximum SS voltage Maximum Vrc voltage	-0.3 -0.3 -0.3	7.5 5.5 5.5	V
Irc Vdg Idg	Maximum output current of the Vrc pin Maximum diagnostic output voltage Maximum diagnostic output current	- -0.3 -1	1 5.5 10	mA V mA
Isd cont. Isd pulsed	Diode max. permanent current (Rth=80°C/W) (1) (Rth=60°C/W) (1) Diode max. pulsed current (1)	- - -	2.0 3.0 15	A
ESD 1 ESD 2	Electrostatic discharge ( human body model C=100pF, R=1500) Electrostatic discharge ( machine model C=200pF, R=0, L=10H)	- -	4 0.5	kV
PD	Maximum power dissipation ( Rth = 80°C/W )	-	1.5	W
TJ max. TL	Max. storage & operating junction temperature Lead temperature ( soldering 10 seconds )	-40 -	+150 300
Vcc/gnd max.	Maximum Vcc to GND voltage (0.4 s - single pulse)	-	60	V
Ig1 (2) max. Ig1 (2) avg.	Maximum transient gate current (Ton < 5S) Maximum average gate current	- -	100 10	mA

(1) Limited by junction temperature.


Description

The IR3220S is a fully protected dual high side switch I.C that integrates an Hbridge motor controller with two very efficient high side MOSFETs in a single 20-pin package. The IR3220S combines with the two low side IRF7484Q MOSFETs as few as 10 external passive components to provide a complete, fully operational and fully protected H-bridge control actuator with forward, reverse, braking and non-braking modes without the need of a micro-controller.

Parameters:

Technical/Catalog Information	IR3220S
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Package / Case	20-SOIC (7.5mm Width)
Mounting Type	Surface Mount
Type	H Bridge
Voltage - Supply	8 V ~ 28 V
On-State Resistance	11 mOhm
Current - Output / Channel	2A
Current - Peak Output	15A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	4
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR3220S IR3220S