ISL6560

Features:

•Two-phase power conversion
•Precision channel current sharing
•Precision CORE voltage regulation
-±0.8% accuracy
•Microprocessor voltage identification input
-VRM 9.0 compliant
-5-bit VID input
-1.100 to 1.850V in 25mV steps
-Programmable "droop" voltage
•Fast transient recovery time
•Overcurrent protection
•High output ripple frequency. . . . . . . . . . . . .100kHz to 2MHz
•Pb-Free Available (RoHS Compliant)




Application

•VRM9.X modules
•AMD Athlon™ processor voltage regulator
•Low output voltage, high current DC/DC converters




Pinout






Specifications

Supply Voltage (V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 15V
CS+. CS- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to V_CC + 0.3V
PWRGD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to V_CC
All Other Inputs and Outputs . . . . . . . . . . . . . . . . . . . .-0.3V to 5V
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3kV

Description

The ISL6560 two-phase current mode, PWM control IC together with companion gate drivers, the HIP6601A, HIP6602A, HIP6603A or HIP6604 and MOSFETs provides a precision voltage regulation system for advanced microprocessors. Two-phase power conversion ISL6560 is a marked departure from earlier single phase converter configurations previously employed to satisfy the ever increasing current demands of modern microprocessors. Multiphase converters ISL6560 , by distributing the power and load current, results in smaller and lower cost transistors with fewer input and output capacitors. These reductions ISL6560 accrue from the higher effective conversion frequency with higher frequency ripple current due to the phase interleaving process of this topology. For example, a two phase converter operating at 350kHz per phase will have a ripple frequency of 700kHz. Higher converter bandwidth is also achievable, resulting in faster response to load transients. An outstanding feature of this controller IC includes highside current sensing with a single current sampling resistor in the input line to the output MOSFET transistors. This single current sampling resistor monitors each channels input current assuring excellent current sharing. Current mode control results in rapid response to changing load demands. Also featured are programmable VID codes with an accuracy of ±0.8% that range from 1.1001.850V, and are set by the microprocessor. Pull up currents on these VID pins eliminates the need for external pull-up resistors. Another feature of this controller IC ISL6560 is the PWRGD monitor circuit and load protection circuits which provide overvoltage protection, overcurrent protection and undervoltage indication.