ISP1103

Features: ` Complies with Universal Serial Bus Specification Rev. 1.1` Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates` Slew-rate controlled differential data driver` Differential input receiver with wide common-mode range and very high data input sensitivity` Stable R...

product image

ISP1103 Picture
SeekIC No. : 004381061 Detail

ISP1103: Features: ` Complies with Universal Serial Bus Specification Rev. 1.1` Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates` Slew-rate controlled differential data driver` Di...

floor Price/Ceiling Price

Part Number:
ISP1103
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

 `  Complies with Universal Serial Bus Specification Rev. 1.1
 `  Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates
 `  Slew-rate controlled differential data driver
 `  Differential input receiver with wide common-mode range and very high data input sensitivity
 `  Stable RCV output during SE0 condition
 `  Two single-ended receivers with hysteresis
 `  Supports 'Philips Encoded Data Interface' and 'USB-IF Standard Data Interface'
 `  Low-power operation in 'suspend' mode
 `  Operates on a 3.3 V supply voltage
 `  Fully backward compatible with PDIUSBP11A
 `  Compatible with VHDL 'Serial Interface Engine' from USB Implementers Forum
 `  Higher than 8 kV ESD protection
 `  Full industrial operating temperature range -40 to +85 °C
 `  Available in SO14, SSOP14 and TSSOP14 packages.



Pinout

  Connection Diagram


Specifications

Symbol Parameter Conditions Min Max Unit
VCC(3.3) supply voltage   -0.5 +6.0 V
VI input voltage   -0.5 VCC+0.5 V
Ilatchup latch-up current VI < 0 or VI > VCC - 200 mA
Vesd electrostatic discharge voltage ILI < 15 A  [1]  - ±8000 V
Tstg storage temperature   -60 +150
Ptot total power dissipation   - <tbf> mW
[1] Equivalent to discharging a 100 pF capacitor via a 1.5 k resistor (Human Body Model).


Description

The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It supports transmitting and receiving serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. It also supports the low-power single-ended input receiver interface in 'suspend' mode operation. The ISP1103 operates on a 3.3 V supply voltage.

The pin configuration conforms to the 'Serial Interface Engine' from the Universal Serial Bus Implementers Forum (USB-IF). The ISP1103 allows for both the 'USB-IF Standard Data Interface' and the 'Philips Encoded Data Interface'. The ISP1103 is fully pin compatible with the industry-standard Philips Semiconductors USB transceiver PDIUSBP11A.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
RF and RFID
Discrete Semiconductor Products
Power Supplies - External/Internal (Off-Board)
Batteries, Chargers, Holders
View more