KH300

supply voltage(±V_CC) ........16V (±5V min)
output current (I_o) ..........100mA
input voltage (V_imax).........(|V_CC| - 2.5)/AV
common mode input voltage .....±1/2 |V_CC|
power dissipation...........refer to graph
junction temperature (T_J).......150°C
storage temperature.........-55°C to +150°C
still air thermal resistance (_ca) ...+25°C/W

The KH300 operational amplifier is a current feedback amplifier that provides a DC-85MHz -3dB bandwidth that is virtually independent of gain setting. Rise and fall times of 4ns and drive capability of  22Vpp and 100mA add to the KH300's impressive specifications.

Using the KH300 is as easy as adding power supplies and a gain-setting resistor. Unlike conventional op amp designs in which optimum gain-bandwidth product occurs at a high gain, minimum settling time at a gain of -1, maximum slew rate at a gain of +1, et cetera, the KH300 offers consistent performance at gain settings from 1 to 40 inverting or non-inverting.As a result, designing with the KH300 is greatly simplified. And since no external compensation is necessary, "tweeks" on the production line have been eliminated, making the KH300 an efficient component for use in production situations.

Flat gain and phase response from DC to 45MHz and superior rise and fall times make the KH300 an ideal amplifier for a broad range of pulse, analog, and digital applications. A 45MHz full power bandwidth (20Vpp into 100) and 3000V/sec slew rate eliminate the need for power buffers in many applications such as driving "flash" A to D converters or linedriving.For applications requiring lower power  consumption, the KH300 can operate on supplies as low as ±5V. Fast overload recovery (20ns) helps prevent loss of data in communications applications and flat phase response reduces distortion, even when data must be sent over extended lengths of line.
 
The KH300A is packaged in a side-brazed 24-pin ceramic DIP and is specified at 25°C.