Purchase KK4050B, In-stock KK4050B From SeekIC.


Part Number: KK4050B
Description: The KK4050B is noninverting hex buffers and feature logic-level conversion using only one supply (volt...


Description: The KK4050B is noninverting hex buffers and feature logic-level conversion using only one supply (volt...
The KK4050B is noninverting hex buffers and feature logic-level conversion using only one supply (voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level onversions. These devices are intended for use as CMOS to DTL/TTL converters.
| Symbol | Parameter | Value | Unit |
| VCC | DC Supply Voltage (Referenced to GND) | -0.5 to +20 | V |
| VIN | DC Input Voltage (Referenced to GND) | VCC** to +18 | V |
| VOUT | DC Output Voltage (Referenced to GND) | -0.5 to VCC +0.5 | V |
| IIN | DC Input Current, per Pin | ±10 | V |
| PD | Power Dissipation per Output Transistor | 100 | mW |
| PD | Power Dissipation in Still Air, Plastic DIP+ SO Package+ | 750 500 |
mW |
| Tstg | Storage Temperature | -65 to +150 | |
| TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SO Package) | 260 |
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
** The KK4050B has high-to-low level voltage conversion capability but not low-to-high level; therefore it is recommended that VIN VCC
KK40F120
PDF/DataSheet Download
