Purchase LC665316A, In-stock LC665316A From SeekIC.
Part Number: LC665316A
Description: The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that int...
- Table of contents:
LC665316A
-
Suppliers
DataSheet
General Description
LC665316A General Description
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, timers, interrupt functions, and an optional sub-oscillator circuit. These microcontrollers are available in a 48-pin package.
LC665316A Maximum Ratings
| Parameter | Symbol | Conditions |
Ratings |
Unit | Note |
| Maximum supply voltage | VDD max | VDD |
0.3 to +7.0 |
V |
|
| Input voltage | VIN 1 | P2, P3 (except for the P33/HOLD pin),P61, and P63 |
0.3 to +7.0 |
V |
1 |
| VIN 2 | All other inputs |
0.3 to VDD + 0.3 |
V |
2 | |
| Output voltage | VOUT 1 | P2, P3 (except for the P33/HOLD pin),P61, and P63 |
0.3 to +7.0 |
V |
1 |
| VOUT 2 | All other inputs |
0.3 to VDD + 0.3 |
V |
2 | |
| Output current per pin |
ION |
P0, P1, P2, P3 (except for the P33/HOLD pin),P4, P5, P6, P8, PC, PD1, PD3 |
20 |
mA |
3 |
| IOP 1 | P0, P1, P4, P5 |
2 |
mA |
4 | |
| IOP 2 | P2, P3 (except for the P33/HOLD pin),P6,P8, and PC |
4 |
mA |
4 | |
| IOP 3 | P41, P43, PC3, PD1, PD3, P81 |
10 |
mA |
4 | |
| Total pin current | ION 1 | P4, P5, P6, P8, PC |
75 |
mA |
3 |
| ION 2 | P0, P1, P2, P3 (except for the P33/HOLD pin),PD1, PD3 |
75 |
mA |
3 | |
| IOP 1 | P4, P5, P6, P8, PC |
25 |
mA |
4 | |
| IOP 2 | P0, P1, P2, P3 (except for the P33/HOLD pin),PD1, PD3 |
25 |
mA |
4 | |
| Allowable power dissipation | Pd max | Ta = 30 to +70°C: DIP48S (QFP48E) |
600(430) |
mW
|
5 |
| Operating temperature | Topr |
30 to +70 |
|||
| Storage temperature | Tstg |
55 to +125 |
Note: 1. Applies to pins with open-drain output specifications. For pins with other than open-drain output specifications, the ratings in the pin column for that pin apply.
2. For the oscillator input and output pins, levels up to the free-running oscillation level are allowed.
3. Sink current (Applies to P8 and PD when either the CMOS output specifications or the inverter array specifications have been selected.)
4. Source current (Applies to all pins except P8 and PD for which the pull-up output specifications, the CMOS output specifications, or the inverter array specifications have been selected. Applies to PD pins for which the inverter array specifications have been selected.) Contact your Sanyo representative for the electrical characteristics when the inverter array or buffer array options are specified.
5. We recommend the use of reflow-soldering techniques to solder-mount QFP packages.
Please consult with your Sanyo representative for details on process conditions if the package itself is to be directly immersed in a dip-soldering bath (dip-soldering spray techniques).
LC665316A Features
• On-chip ROM capacitiy of 4, 6, 8, 12, and 16 kilobytes, and an on-chip RAM capacity of 512 * 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 42 pins
• A sub-oscillator circuit can be used (option)
This circuit allows power dissipation to be reduced by operating at lower speeds.
• 8-bit serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.95 to 10 s (at 3 to 5.5 V)
• Powerful timer functions and prescalers
- Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
- Time limit timer, event counter, PWM output, and square wave output using an 8-bit timer.
- Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
- External interrupts: 3 factors/3 vector locations
- Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions
16-value comparator inputs, 20-mA drive outputs,inverter circuits, pull-up and open-drain circuits selectable as options.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP48S, QIP48E (QFP48E)
• Evaluation LSIs: LC66599 (evaluation chip) + EVA800/850-TB662YXX2
LC66E5316(on-chip EPROM microcontroller)
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 42 pins
• A sub-oscillator circuit can be used (option)
This circuit allows power dissipation to be reduced by operating at lower speeds.
• 8-bit serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.95 to 10 s (at 3 to 5.5 V)
• Powerful timer functions and prescalers
- Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
- Time limit timer, event counter, PWM output, and square wave output using an 8-bit timer.
- Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
- External interrupts: 3 factors/3 vector locations
- Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions
16-value comparator inputs, 20-mA drive outputs,inverter circuits, pull-up and open-drain circuits selectable as options.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP48S, QIP48E (QFP48E)
• Evaluation LSIs: LC66599 (evaluation chip) + EVA800/850-TB662YXX2
LC66E5316(on-chip EPROM microcontroller)
LC665316A Connection Diagram
LC665316A
PDF/DataSheet Download
- Datasheet: LC665316A
- File Size: 163074 KB
- Manufacturer: Sanyo
- Click here to Download
- ·LC6.5
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 600987 KB
- ·LC6.5A
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 600987 KB
- ·LC60
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 81337 KB
- ·LC60A
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 81337 KB
- ·LC62F0164A
- SANYO [Sanyo Semicon Device]
- 16-Bit Single-Chip Microcontroller with On-Chip 64K-Word Flash EEPROM and 1K-Word RAM
- 925447 KB
- ·LC64
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 81337 KB
- ·LC64A
- MICROSEMI [Microsemi Corporation]
- 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
- 81337 KB
- ·LC65
- MICROSEMI [Microsemi Corporation]
- TRANSIENT ABSORPTION ZENER
- 81337 KB
LC665316A Relative Products
LC665312A
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, ti...
LC665308A
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, ti...
LC665306A
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, ti...
LC665304A
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, ti...
LC66506B
The LC66506B is a kind of 64-pin package type CMOS 4-bit single-chip microcomputer. It contains a ROM, a RAM, I/O ports, a dual 8-bit serial interface, a 4-channel comparator input, a dual 3-level input ports, a 12-bit timer, a 8-bit timer, and provides 11 i...
LC66404A
The LC66404A is a kind of 42-pin package type CMOS 4-bit single-chip microcomputer. It contains a ROM, a RAM, I/O ports, a dual 8-bit serial interface, A/D converter input, a 12-bit timer, a 8-bit timer, and provides 8 interrupt sources with 8 vector address...
Hotspot Suppliers Product
DFA75BA160
Price: 50-60 USD
THREE PHASE DIODE, THYRISTOR, complex isolated module, 1600V, 75A
IDT74FCT646ATPY
Price: 0.1-1 USD
Fast cmos octal transceiver, SOP, -60 to +120mA, -0.5 to +7.0 V
AQZ207
Price: 0.1-100 USD
PhotoMOS Solid State Relay, AC/DC 200V, 1.0A, 4-SIP Board Layout, Circuit SPST-NO (1 Form A)
TMS320F2812PGFA
Price: 11-15 USD
IC DSP W/FLASH 176-LQFP - TMS320F2812PGFA
74HC573D
Price: 0.1-0.2 USD
high-speed Si-gate CMOS device, SOIC-20, 3STATE, 6 V, 70 mA, Octal D-type transparent latch
54ACT138DMQB
Price: 0.01-0.02 USD
1-of-8 Decoder/Demultiplexer 54ACT138DMQB
FT232RL
Price: 0.65-0.85 USD
USB UART interface Integrated Circuit Devices, optional clock generator output, FTDIChip-ID Securi...
MT48LC16M8A2P-75IT
Price: 0.85-1 USD
high-speed CMOS, dynamic random access memory, TSOP54, –1 to +4.6 V, 1W, Fully synchronous
1N4004
Price: 0.01-0.02 USD
general purpose rectifier, 400 V, 1.0 A, Low forward voltage drop, High surge current capability
TDA2543
Price: 2.5-3 USD
IF AMPLIFIER WITH DEMODULATOR AND AFC
A3979SLPT
Price: 3.5-4.2 USD
Microstepping, DMOS Driver with Translator, 28-TSSOP
ETRAX100LX
Price: 6.5-7.5 USD
System-on-Chip, BGA, 16Mb
