Features: `Doubles or Splits Input Supply Voltage`SOT23-6 Package`12W Typical Output Impedance`90% Typical Conversion Efficiency at 40 mA`1A Typical Shutdown CurrentApplication·Cellular Phones·Pagers·PDAs·Operational Amplifier Power Suppliers·Interface Power Suppliers·Handheld InstrumentsSpecifica...
LM2665: Features: `Doubles or Splits Input Supply Voltage`SOT23-6 Package`12W Typical Output Impedance`90% Typical Conversion Efficiency at 40 mA`1A Typical Shutdown CurrentApplication·Cellular Phones·Pager...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Output Current | 40 mA |
| Input Min Voltage | 1.8 Volt |
| Input Max Voltage | 5.8 Volt |
| Switching Frequency | 160 kHz |
| On/Off Pin | Yes |
| Efficiency (peak) | 91 % |
| Error Flag | No |
| Sync Pin | No |
| Adj Switch Frequency | No |
| Adjustable Output | No |
| Inverting | No |
| Step-Up | Yes |
| Step-Down | No |
| RegType | Switched Capacitor |
| Temperature Min | -40 deg C |
| Temperature Max | 85 deg C |
| Topology | Charge Pump |
| View Using Catalog | |
The LM2665 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of +2.5V to +5.5V. Two low cost capacitors and a diode (needed during start-up) are used in this circuit to provide up to 40 mA of output current. The LM2665 can also work as a voltage divider to split a voltage in the range of +1.8V to +11V in half.
The LM2665 operates at 160 kHz oscillator frequency to reduce output resistance and voltage ripple. With an operating current of only 650 A (operating efficiency greater than 90% with most loads) and 1A typical shutdown current, the LM2665 provides ideal performance for battery powered systems. The device is in SOT-23-6 package.