Features: Wide power supply voltage rangeSingle supply: 3V to 32VDual supply: ±1.5V to ±16V Low supply current drain-essentially independent of supply voltage: 600 A Low input biasing current: 50 nA Low input offset voltage: 2 mV Low input offset current: 5 nA Input common-mode voltage range inclu...
LM392: Features: Wide power supply voltage rangeSingle supply: 3V to 32VDual supply: ±1.5V to ±16V Low supply current drain-essentially independent of supply voltage: 600 A Low input biasing current: 50 nA...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply Voltage, V+ | 32V or ±16V |
Differential Input Voltage | 32V |
Input Voltage | −0.3V to +32V |
Power Dissipation (Note 2) | |
Molded DIP (LM392N) | 820 mW |
Small Outline Package (LM392M) | 530 mW |
Output Short-Circuit to Ground (Note 3) | Continuous |
Input Current (VIN < −0.3 VDC) (Note 4) | 50 mA |
Operating Temperature Range | 0to +70 |
Storage Temperature Range | −65 to +150 |
Lead Temperature (Soldering, 10 seconds) | 260 |
ESD rating to be determined. | |
Soldering Information | |
Dual-in-Line Package | |
Soldering (10 seconds) | 260 |
Small Outline Package | |
Vapor Phase (60 seconds) | 215 |
Infrared (15 seconds) | 220 |
Response Time | 1.5 us |
Output Bus | Open Drain |
Supply Min | 3 Volt |
Supply Max | 32 Volt |
Channels | 2 Channels |
Offset Voltage max, 25C | 5 mV |
Output Current | 20 mA |
Input Range | Vcm to V- |
Supply Current Per Channel | 0.5 mA |
PowerWise Rating 3 | 750 uA x us |
Max Input Bias Current | 400 nA |
Special Features | w/ Comparator, w/ OpAmp |
Temperature Min | 0 deg C |
Temperature Max | 70 deg C |
Function | Op Amp and Comparator |
View Using Catalog |
The LM392 series consists of 2 independent building block circuits. One is a high gain, internally frequency compensated operational amplifier, and the other is a precision voltage comparator. Both the operational amplifier and the voltage comparator have been specifically designed to operate from a single power supply over a wide range of voltages. Both circuits have input stages which will common-mode input down to ground when operating from a single power supply. Operation from split power supplies is also possible and the low power supply current is independent of the magnitude of the supply voltage.
Application areas include transducer amplifier with pulse shaper, DC gain block with level detector, VCO, as well as all conventional operational amplifier or voltage comparator circuits.Both circuits can be operated directly from the standard 5 VDC power supply voltage used in digital systems,and the output of the comparator will interface directly with either TTL or CMOS logic. In addition, the low power drain makes the LM392 extremely useful in the design of portable equipment.
The LM392 series consists of 2 independent building block circuits. One is a high gain, internally frequency compensated operational amplifier, and the other is a precision voltage comparator. Both the operational amplifier and the voltage comparator have been specifically designed to operate from a single power supply over a wide range of voltages. Both circuits have input stages which will common-mode input down to ground when operating from a single power supply. Operation from split power supplies is also possible and the low power supply current is independent of the magnitude of the supply voltage.
Application areas include transducer amplifier with pulse shaper, DC gain block with level detector, VCO, as well as all conventional operational amplifier or voltage comparator circuits. Both circuits can be operated directly from the standard 5 VDC power supply voltage used in digital systems, and the output of the comparator will interface directly with either TTL or CMOS logic. In addition, the low power drain makes the LM392 extremely useful in the design of portable equipment.
Reliability Metrics
Part Number | Process | EFR Reject | EFR Sample Size | PPM | LTA Rejects | LTA Device Hours | FITS | MTTF (Hours) |
LM392 MWA | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM392M | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM392MX | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM392N | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
Design Tools
Title | Size in Kbytes | Date | |||
Amplifiers Selection Guide software for Windows | 8 Kbytes | 6-Mar-2007 | View |
If you have trouble printing or viewing PDF file(s), see Printing Problems. |
Application Notes
Title | Size in Kbytes | Date | |
AN-286: Application Note 286 Applications of the LM392 Comparator Op Amp IC | 135 Kbytes | 2-Oct-02 | Download |
If you have trouble printing or viewing PDF file(s), see Printing Problems. |
More Application Notes
Title | Size in Kbytes | Date | |
AN-184: Application Note 184 References for A/D Converters | 64 Kbytes | 3-Oct-02 | Download |
AN-184 (Japanese): Application Note 184 References for A/D Converters 640){this.height=this.height*640/this.width;this.width=640;}' border="0" alt=" Connection Diagram"> |
124 Kbytes | ||
AN-173: Application Note 173 IC Zener Eases Reference Design | 54 Kbytes | 1-Oct-02 | Download |
AN-460: Application Note 460 LM34/LM35 Precision Monolithic Temperature Sensors | 306 Kbytes | 20-Sep-02 | Download |
AN-460 (Japanese): Application Note 460 LM34/LM35 Precision Monolithic Temperature Sensors 640){this.height=this.height*640/this.width;this.width=640;}' border="0" alt=" Connection Diagram"> |
322 Kbytes | ||
AN-222: Application Note 222 Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise | 399 Kbytes | 1-Oct-02 | Download |
AN-293: Application Note 293 Control Applications of CMOS DACs | 385 Kbytes | 4-Oct-04 | Download |
AN-263: Application Note 263 Sine Wave Generation Techniques | 350 Kbytes | 26-May-09 | Download |
AN-161: Application Note 161 IC Voltage Reference has 1ppm per Degree Drift | 138 Kbytes | 10-Oct-02 | Download |
AN-181: Application Note 181 3-Terminal Regulator Is Adjustable | 165 Kbytes | 1-May-04 | Download |
AN-262: Application Note 262 Applying Dual and Quad FET Op Amps | 416 Kbytes | 2-Oct-02 | Download |
AN-311: Application Note 311 Theory and Applications of Logarithmic Amplifiers | 258 Kbytes | 2-Oct-02 | Download |
AN-274: Application Note 274 CMOS A/D Converter Interfaces Easily with Many Microprocessors | 73 Kbytes | 3-Oct-02 | Download |
AN-299: Application Note 299 Audio Applications of Linear Integrated Circuits | 232 Kbytes | 24-Feb-99 | Download |
AN-265: Application Note 265 An Electronic Watt-Watt-Hour Meter | 185 Kbytes | 3-Oct-02 | Download |
AN-31: Application Note 31 Op Amp Circuit Collection | 962 Kbytes | 2-Oct-02 | Download |
If you have trouble printing or viewing PDF file(s), see Printing Problems. |