Features: (Typical Unless Otherwise Noted)Easy-To-Use Voltage Feedback Topology Very High Slew Rate: 3600V/µs Wide Unity-Gain-Bandwidth Product: 100 MHz −3 dB Frequency @ AV = +2: 62 MHzLow Supply Current: 2.5 mA High CMRR: 110 dBHigh Open Loop Gain: 90 dBSpecified for ±15V and ±5V Ope...
LM6171: Features: (Typical Unless Otherwise Noted)Easy-To-Use Voltage Feedback Topology Very High Slew Rate: 3600V/µs Wide Unity-Gain-Bandwidth Product: 100 MHz −3 dB Frequency @ AV = +2: 62 MHz...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
ESD Tolerance ............................(Note 2) 2.5 kV
Supply Voltage............................. (V+V−) 36V
Differential Input Voltage
(Note 11) ..................................................±10V
Common-Mode
Voltage Range ................V+ −1.4V to V− + 1.4V
Output Short Circuit to Ground
(Note 3) Continuous
Storage Temperature Range −65°C to +150°C
Maximum Junction Temperature
(Note 4) ...................................................150°C
-3dB BW | 160 MHz |
AvCL for -3dB BW | 1 V/V |
Slew Rate | 3600 Volts/usec |
Input OutputType | Not Rail to Rail |
Supply Min | 5.5 Volt |
Supply Max | 34 Volt |
Supply Current Per Channel | 2.5 mA |
PowerWise Rating 2 | 15.6 uA/MHz |
Channels | 1 Channels |
Offset Voltage max, 25C | 6, 3 mV |
Max Input Bias Current | 4000 nA |
Output Current | 135 mA |
Voltage Noise | 12 nV/root(Hz) |
Shut down | No |
Feedback Type | Voltage |
Av+1 BW | 160 MHz |
Av+2 BW | 80 MHz |
Av+5 BW | 32 MHz |
Av+10 BW | 16 MHz |
Av+20 BW | 8 MHz |
HD 2nd | -50 dB |
HD 3rd | -50 dB |
Diff Gain | 0.03 dB |
Diff Phase | 0.5 % |
Settling Time | 48 ns |
Tsettling Conditions | to 0.1% |
Function | Op Amp |
Gain Bandwidth | 100 MHz |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
PowerWise | Yes |
View Using Catalog |
The LM6171 is a high speed unity-gain stable voltage feedback amplifier. It offers a high slew rate of 3600V/µs and a unity-gain bandwidth of 100 MHz while consuming only 2.5 mA of supply current. The LM6171 has very impressive AC and DC performance which is a great benefit for high speed signal processing and video applications.
The ±15V power supplies allow for large signal swings and give greater dynamic range and signal-to-noise ratio. The LM6171 has high output current drive, low SFDR and THD, ideal for ADC/DAC systems. The LM6171 is specified for ±5V operation for portable applications.
The LM6171 is built on National's advanced VIP™ III (Vertically Integrated PNP) complementary bipolar process.