LT1010CT

The LT1010CT is designed as a fast, unity-gain buffer that can increase the output capability of existing IC op amps by more than an order of magnitude. This easy to use part makes fast amplifiers less sensitive to capacitive loading, reduces thermal feedback in precision DC amplifiers and is recommended for a wide range of fast and slow applications.

LT1010CT has eight features. (1)20MHz bandwidth. (2)75V/us slew rate. (3)Drives +/-10V into 75. (4)5mA quiescent current. (5)Drives capacitive loads >1uF. (6)Current and thermal limit. (7)Operates from single supply >=4.5V. (8)Very low distortion operation. Those are all the main features.

Some absolute maximum ratings of LT1010CT have been concluded into several points as follow. (1)Its total supply voltage would be +/-22V. (2)Its continuous output current would be +/-150mA. (3)Its continuous power dissipation would be 4.0W. (4)Its input current would be +/-40mA. (5)Its operating junction temperature range would be from 0°C to 125°C. (6)Its storage temperature range would be from -65°C to 150°C. (7)Its lead temperature soldering 10 seconds would be 300°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of LT1010CT are concluded as follow. (1)Its output offset voltage would be min 0mV and max 150mV. (2)Its input bias current would be min 0uA and max 250uA. (3)Its large signal voltage gain would be min 0.995V/V and max 1.0V/V. (4)Its output resistance would be min 5 and max 10. (5)Its slew rate would be min 75V/us. (6)Its positive saturation offset would be max 1.0V. (7)Its negative saturation offset would be max 0.2V. (8)Its saturation resistance would be max 22. (9)Its bias terminal voltage would be min 700mV and max 840mV. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!