Features: Allows Safe Board Insertion and Removal from a Live Backplane System Reset and Power Good Control OutputsProgrammable Electronic Circuit Breaker User Programmable Supply Voltage Power-Up Rate High Side Driver for Two External N-ChannelsConnection Inputs Detect Board Insertion or Removal ...
LTC1421-2.5: Features: Allows Safe Board Insertion and Removal from a Live Backplane System Reset and Power Good Control OutputsProgrammable Electronic Circuit Breaker User Programmable Supply Voltage Power-Up R...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LTC®1421/LTC1421-2.5 are Hot SwapTM controllers that allow a board to be safely inserted and removed from live backplane. Using external N-channel pass transistors, the board supply voltages can be ramped up at a programmable rate. Two high side switch drivers control the Nchannel gates for supply voltages ranging from 3V to A programmable electronic circuit breaker protects against shorts. Warning signals indicate that the circuit breaker has tripped, a power failure has occurred or that the switch drivers are turned off.
The reset output can be used generate a system reset when the power cycles or a occurs. The two connect inputs can be used with staggered connector pins to indicate board insertion or removal. The power-on reset input can be used to cycle board power or clear the circuit breaker. The trip point of the ground sense comparator is set 0.1V for LTC1421 and 2.5V for LTC1421-2.5.
The LTC1421/LTC1421-2.5 are available in 24-pin SO SSOP packages.