LTP-3786E-03

Display Type :
Number of Digits :
Character Size :
Illumination Color :
Wavelength :
Common Pin :
Operating Voltage :
Operating Current :
Maximum Operating Temperature :
Minimum Operating Temperature :
Packaging : Tube


Description

The LTP-3786E-03 is a 0.54 inch(13.8mm) digit height dual digit 14-segment alphanumeric display.This device utilizes red orange LED chips,which are made from GaAsP on GaP substrate,and has a light gray face white sements.

Features of the LTP-3786E-03 are:(1)0.54 inch(13.8mm) digit height;(2)continuous uniform segments;(3)low power requirement;(4)excellent characters appearance;(5)high brightness and high contrast;(6)wide viewing angle;(7)solid state reliability;(8)categorized for luminous intensity.

The absolute maximum ratings of the LTP-3786E-03 can be summarized as:(1):the parameter is power dissipation per segment,the maximum rating is 75,the unit is mW;(2):the parameter is peak forward current per segment(1/10 duty cycle,1.0ms pulse width),the maximum rating is 100,the unit is mA;(3):the parameter is continous forward current pre segment,the maximum rating is 25,the unit is mA;(4):the parameter is derating linear from 25 pre segment,the maximum rating is 0.33,the unit is mA/;(5):the parameter is reverse voltage per segment,the maximum rating is 5,the unit is V;(6):the parameter is operating temperature range,the maximum rating is -35 to +85,the unit is ;(7):the parameter is storage temperature range,the maximum rating is -35 to +85,the unit is ;(8):the solder temperature max 260 for max 3 sec at 1.6mm[1/16inch] below seating plane.

The electrical characteristics of the LTP-3786E-03 can be summarized as:(1):the parameter is average luminous indtensity,the symbol is IV,the Min is 800,the Typ is 2300,the unit is cd;(2):the parameter is peak emitssion wavelength,the symbol is p,the Typ is 630,the unit is nm;(3):the parameter is spectral line half-width,the symbol is ,the Typ is 40,the unit is nm;(4):the parameter is dominat wavelength,the symbol is d,the Typ is 621,the unit is nm;(5):the parameter is forward voltage per segment,the symbol is VF,the Typ is 2.0,the Max is 2.6,the unit is V;(6):the parameter is reverse current per segment,the symbol is IR,the Max is 100,the unit is A;(7):the parameter is luminous intensity matching ratio,the symbol is Iv-m,the Max is 2:1.