MAX13183E

The MAX13181E-MAX13184E are available in a tiny 10pin, 2mm x 2mm DFN. The MAX13183E/MAX13184E are also available in industry-standard 14-pin SO packages. The devices operate over the extended -40°C to +85°C temperature range. The MAX13181EMAX13184E are full-duplex and selectable half-/full-duplex RS-485 transceivers in a tiny 2mm x 2mm DFN package. The slew-rate limited MAX13181E/MAX13182E allow error-free data transmission up to 250kbps. The MAX13183E/MAX13184E feature full-speed drivers, allowing data rates of up to 16Mbps. The MAX13182E/MAX13184E are configured for fullduplex operation, while the MAX13181E/MAX13183E feature pin-selectable halfor full-duplex operation. All driver outputs and receiver inputs include extended ESD protection. These devices are designed for space-constrained applications by including extended ESD protection to ±15kV per Human Body Model (HBM)and integrating pullup/pulldown resistors on the DE, RE and H/F inputs to reduce external components. The MAX13182E/MAX13184E feature a low-current shutdown mode for power-sensitive applications. These devices have a 1/8 unit-load input receiver that allows up to 256 transceivers on the bus. The MAX13181E/MAX13182E feature reduced slew-rate drivers to minimize EMI and reflections that are caused by improperly terminated cables.

The features of MAX13183E can be summarized as (1)available in Tiny, 10-Pin, 2mm x 2mm, DFN and 14-Pin SO Packages; (2)+5.0V operation; (3)extended ESD protection ±15kV human body model/ ±12kV IEC 61000-4-2 Air-Gap disharge/ ±6kV IEC 61000-4-2 contact disharge; (4)slew-rate limiting facilitates error-free data transmission (MAX13181E/MAX13182E); (5)2.5A (typ)low-current shutdown mode; (6)1/8-Unit load allows up to 256 transceivers on the bus.

The absolute maximum ratings of MAX13183E are (1)supply voltage: (VCC): -0.3V to +6V; (2)control voltage (RE, DE, DI, H/F): -0.3V to +6V; (3)driver output voltage (A, B, Y, Z): -8V to +12.5V; (4)receiver input voltage: (A, B): -8V to +12.5V; (5)receiver input voltage: Full-Duplex (A, B):-8V to +12.5V; (6)receiver output voltage (RO): -0.3V to (VCC + 0.3V); (7)short-circuit duration (A, B, Y, Z)to GND: Continuous; (8)continuous power dissipation (TA = +70°C)10-Pin DFN (derate 5mW/°C above +70°C ): 403mW; (9)14-Pin SO (derate 8.3mW/°C above +70°C ): 667mW; (10)operating temperature range: -40°C to +85°C; (11)storage temperature range: -65°C to +150°C; (12)junction temperature:+150°C; (13)lead temperature (soldering, 10s): +300°C.