Purchase MAX442_1281508, In-stock MAX442_1281508 From SeekIC.


Part Number: MAX442_1281508
Description: The MAX442 combines a 140MHz video amplifier with a high-speed, 2-channel multiplexer in an 8-pin pack...


Description: The MAX442 combines a 140MHz video amplifier with a high-speed, 2-channel multiplexer in an 8-pin pack...
The MAX442 combines a 140MHz video amplifier with a high-speed, 2-channel multiplexer in an 8-pin package.With its 36ns switching time and low differential gain (0.07%) and phase (0.09°) errors, it is ideal for broad-cast-quality video applications. The device is designed to drive both 50Ω and 75Ω cables, and can directly drive a 75Ω load to ±3V.
The MAX442 video amplifier is compensated for unity-gain stability, and features a 140MHz bandwidth and a 250V/µs slew rate. The multiplexer's low input capaci-tance (4pF with the channel on or off) maximizes high-speed performance, and a ground pin separating the two input channels minimizes crosstalk and simplifies board layout.
The MAX442 operates from ±5V supplies and typically consumes 300mW. For applications that require more input channels, see the data sheets for the MAX440 8-channel mux/amp and the MAX441 4-channel mux/amp.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Supply Voltage (V+ to V-).......................................................12V
Analog Input Voltage ............................(V+ + 0.3V) to (V- - 0.3V)
Digital Input Voltage .....................................-0.3V to (V+ + 0.3V)
Short-Circuit Current Duration ........................................1 minute
Input Current to Any Pin, Power On or Off........................±50mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) ............ 727mW
SO (derate 5.88mW/°C above +70°C) ......................... 471mW
Operating Temperature Ranges
MAX442C_A........................................................ 0°C to +70°C
MAX442E_A..................................................... -40°C to +85°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10sec) ........................... ..+300°C
MAX002
PDF/DataSheet Download








