MAX6030AEUR-T

Series VREF - Input Voltage (Min) :
Product : Voltage References
Reference Type : Precision
Packaging : Reel
Maximum Operating Temperature : + 85 C
Package / Case : SOT-23
Initial Accuracy : 0.2 %
Topology : Series References
Output Voltage : 3 V
Series VREF - Input Voltage (Max) : 13.5 V
Shunt Current (Max) : 0.5 mA
Average Temperature Coefficient (Typ) : 6 PPM / C


Features:

0.2% (max) Initial Accuracy
15ppm/°C (max) Temperature Coefficient
35µA (max) Quiescent Supply Current
0.8µA/V Supply Current Variation with V_IN
±500µA Output Source and Sink Current
100mV Dropout at 500µA Load Current
0.12µV/µA Load Regulation
8µV/V Line Regulation
Stable with C_LOAD= 0 to 2.2nF


Application

Hand-Held Equipment
Data Acquisition Systems
Industrial and Process-Control Systems
Battery-Operated Equipment
Hard-Disk Drives


Pinout

Specifications

(Voltages Referenced to GND)
IN.........................................................................-0.3V to +13.5V
OUT.............................................................-0.3V to (V_IN+ 0.3V)
Output Short Circuit to GND or IN (V_IN< 6V)............Continuous
Output Short Circuit to GND or IN (V_IN6V).........................60s
Continuous Power Dissipation (T_A= +70°C)
3-Pin SOT23-3 (derate 4.0mW/°C above +70°C)........320mW
Operating Temperature Range...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10s).................................+300°C


Description

The MAX6030AEUR-T precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary curvature-correction circuit and laser-trimmed thin-film resistors that result in a low temperature coefficient of<15ppm/°C and initial accuracy of better than 0.2%.The MAX6030AEUR-T is specified over the extended temper-ature range.These series-mode voltage references draw only 27µAof quiescent supply current and can sink or source up to 500µA of load current. Unlike conventional shunt-mode (two-terminal) references that waste supply cur-rent and require an external resistor, devices in the MAX6012family offer a supply current that's virtually independent of supply voltage (with only a 0.8µA/V vari-ation with supply voltage) and do not require an external resistor. Additionally, the MAX6030AEUR-T do not require an external compensation capacitor and are stable with up to 2.2nF of load capac-itance. Eliminating the external compensation capacitor saves valuable board area in space-critical applications.Their low dropout voltage and supply-independent,ultra-low supply current make these devices ideal for battery-operated, low-voltage systems.

Parameters:

Technical/Catalog Information	MAX6030AEUR-T
Vendor	Maxim Integrated Products
Category	Integrated Circuits (ICs)
Reference Type	Series
Voltage - Output	3V
Tolerance	±0.2%
Temperature Coefficient	20ppm/°C
Voltage - Input	3.2 ~ 12.6 V
Number of Channels	1
Current - Cathode	-
Current - Quiescent	35A
Current - Output	500A
Operating Temperature	-40°C ~ 85°C
Package / Case	SOT-23-3, TO-236-3, Micro3?, SSD3, SST3
Packaging	Tape & Reel (TR)
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	MAX6030AEUR T MAX6030AEURT