MAX764

The MAX764/MAX765/MAX766 inverting switching regulators are highly efficient over a wide range of load currents,delivering up to 1.5W. A unique, current-limited,pulse-frequency-modulated (PFM) control scheme combines the benefits of traditional PFM converters with the benefits of pulse-width-modulated (PWM) converters.Like PWM converters, the MAX764/MAX765/MAX766 are highly efficient at heavy loads. Yet because they are PFM devices, they use less than 120µA of supply current (vs.2mA to 10mA for a PWM device).

The input voltage range is 3V to 16V. The output voltage is preset at -5V (MAX764), -12V (MAX765), or -15V(MAX766); it can also be adjusted from -1V to -16V using two external resistors (Dual Mode^TM). The maximum operating VIN - VOUT differential is 20V. 

These devices use miniature external components; their high switching frequencies (up to 300kHz) allow for lessthan 5mm diameter surface-mount magnetics. A standard 47µH inductor is ideal for most applications, so no magnetics design is necessary.

An internal power MOSFET makes the MAX764/MAX765/MAX766 ideal for minimum component count, low- andmedium-power applications. For increased output drive capability or higher output voltages, use the MAX774/MAX775/MAX776 or MAX1774, which drive an external power P-channel MOSFET for loads up to 5W.