Purchase MAX9325, In-stock MAX9325 From SeekIC.
Part Number: MAX9325
Description: The MAX9325 low-skew, 2:8 differential driver features extremely low output-to-output skew (50ps max) ...
- Table of contents:
MAX9325
-
Suppliers
DataSheet
General Description
MAX9325 General Description
The MAX9325 low-skew, 2:8 differential driver features extremely low output-to-output skew (50ps max) and part-to-part skew (225ps max). These features make the device ideal for clock and data distribution across a backplane or board. The device selects one of the two differential HSTL or LVECL/LVPECL inputs and repeats them at eight differential outputs. Outputs are compatible with LVECL and LVPECL, and can directly drive 50 terminated transmission lines.
The differential inputs can be configured to accept a single-ended signal when the unused complementary input is connected to the on-chip reference output voltage VBB. All inputs have internal pulldown resistors to VEE. The internal pulldowns and a fail-safe circuit ensure differential low default outputs when the inputs are left open or at VEE.
The MAX9325 operates over a 2.375V to 3.8V supply range for interfacing to differential HSTL and LVPECL signals. This allows high-performance clock or data distribution in systems with a nominal +2.5V or +3.3V supply. For LVECL operation, the device operates with a -2.375V to -3.8V supply.
The MAX9325 is offered in 28-lead PLCC and spacesaving 28-lead QFN packages. The MAX9325 is specified for operation from -40°C to +85°C.
MAX9325 Maximum Ratings
VCC - VEE...............................................................-0.3V to +4.1V
Inputs (CLK_, CLK_, CLK_SEL) to VEE .........-0.3V to (VCC + 0.3V)
CLK_ to CLK_ ....................................................................±3.0V
Continuous Output Current ................................................50mA
Surge Output Current........................................................100mA
VBB Sink/Source Current................................................±0.65mA
Continuous Power Dissipation (TA = +70°C)
28-Lead PLCC (derate 10.5mW/°C above +70°C) ........842mW
JA in Still Air ................................................................+95°C/W
JC................................................................................+25°C/W
28-Lead QFN (derate 20.8mW/°C above +70°C) ........1667mW
JA in Still Air ................................................................+48°C/W
JC..................................................................................+2°C/W
Operating Temperature Range .........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range ...........................-65°C to +150°C
ESD Protection
Human Body Model (CLK_, CLK_, Q_, Q_)............................2kV
Soldering Temperature (10s) ..........................................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
MAX9325 Features
· 50ps (max) Output-to-Output Skew
· 1.5psRMS (max) Random Jitter
· Guaranteed 300mV Differential Output at 700MHz
· +2.375V to +3.8V Supplies for Differential HSTL/LVPECL
· -2.375V to -3.8V Supplies for Differential LVECL
· Two Selectable Differential Inputs
· On-Chip Reference for Single-Ended Inputs
· Outputs Low for Inputs Open or at VEE
· Pin Compatible with MC100LVE310
· 1.5psRMS (max) Random Jitter
· Guaranteed 300mV Differential Output at 700MHz
· +2.375V to +3.8V Supplies for Differential HSTL/LVPECL
· -2.375V to -3.8V Supplies for Differential LVECL
· Two Selectable Differential Inputs
· On-Chip Reference for Single-Ended Inputs
· Outputs Low for Inputs Open or at VEE
· Pin Compatible with MC100LVE310
MAX9325 Typical Application
·Precision Clock Distribution
·Low-Jitter Data Repeaters
·Low-Jitter Data Repeaters
MAX9325 Connection Diagram
MAX9325
PDF/DataSheet Download
- Datasheet: MAX9325
- File Size: 327553 KB
- Manufacturer: Maxim
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX9325 Relative Products
MAX9324
The MAX9324 low-skew, low-jitter, clock and data driver distributes a differential LVPECL input to four differential LVPECL outputs and one single-ended LVCMOS output.All outputs default of MAX9324 to logic low when the differential inputs equal GND or are l...
MAX9323
The MAX9323 low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs. A single logic control signal (CLK_SEL) selects the input signal to distribute to all outputs. The MAX9323 operates...
MAX9322
The MAX9322 low-skew 1:15 differential clock driver reproduces or divides one of two differential input clocks at 15 differential outputs. An input multiplexer selects from one of two input clocks with input switching frequency in exc ss of 1.0GHz. The 15 ou...
MAX9321B
The MAX9321B low-skew differential receiver/driver is designed for clock and data distribution. The differential input can be adapted to accept a single-ended input by connecting the on-chip VBB supply to an input as a reference voltage.The MAX9321B features...
MAX9321A
The MAX9321/MAX9321A are low-skew differential receiver/drivers designed for clock and data distribution. The differential input can be adapted to accept asingle-ended input by connecting the on-chip VBB supply to an input as a reference voltage.The MAX9321/...
MAX9321
The MAX9321/MAX9321A are low-skew differential receiver/drivers designed for clock and data distribution. The differential input can be adapted to accept asingle-ended input by connecting the on-chip VBB supply to an input as a reference voltage.The MAX9321/...
Hotspot Suppliers Product
TMS320F2812PGFA
Price: 20-25 USD
digital signal processor, QFP, – 0.3 V to 4.6 V, High-Performance Static CMOS Technology
M57962L
Price: 1-2 USD
ZIP12, hybrid integrated circuit, driving IGBT module, 30kV/ms, 2500 Volts
TPS54350PWPR
Price: 1.35-1.6 USD
4.5-V, 20-V input, 3-A output synchronous, pwm switcher, with integrated fet(swift), HTSSOP, Inter...
op77az/883
Price: 31.6-33 USD
state-of-the-art, op amps, outstanding fgain
MC68HC11F1CFNE4
Price: 1-5 USD
ROM-based microcontroller, PLCC, MC68HC11 CPU, 25 mA, – 0.3 to + 7.0 V
DS1307ZN
Price: 0.15-0.3 USD
64 x 8, Serial, I2C Real-Time Clock, SOP8, 56-Byte, Battery-Backed, -0.5V to +7.0V, 4.5 to 5.5 V S...
TMS320F2811PBKQ
Price: 20-25 USD
DSP Fixed-Point, 32-Bit 150MHz 150MIPS, 128-Pin LQFP
LS1240AL
Price: 1-100 USD
DIP-8, electronic tone ringer, built-in bridge rectifier, monolithic integrated circuit, 200 Vrms,...
ISD2548P
Price: 0.1-1 USD
record/playback device, DIP-28, -0.3V to +7.0V, multiple-messages, 1 μA
FMM5059VF
Price: 95-115 USD
Ku band, power amplifier MMIC, module, High Output Power, 35.0dBm, Low Input VSWR, +10V
S3C44B0X01L
Price: 4-5.5 USD
RISC microprocessor, TQFP160, 16/32-bit
SN75196N
Price: 0.1-5 USD
driver and receiver, DIP, 15V
