Features: • Minimum instruction execution time: 0.8 ms at 5 MHz• F2MC-8L family CPU corePinoutSpecifications Parameter Symbol Rating Unit Remarks Min Max Power supply voltage VCC VSS 0.3 VSS + 7.0 V LCD power supply voltage V0 to V3 VSS 0.3 VSS + 7.0 V ...
MB89953: Features: • Minimum instruction execution time: 0.8 ms at 5 MHz• F2MC-8L family CPU corePinoutSpecifications Parameter Symbol Rating Unit Remarks Min Max Power supply vol...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Parameter | Symbol | Rating | Unit | Remarks | |
| Min | Max | ||||
| Power supply voltage | VCC |
VSS 0.3 | VSS + 7.0 | V | |
| LCD power supply voltage | V0 to V3 | VSS 0.3 | VSS + 7.0 | V | |
| Input voltage | VI1 VI2 VI3 |
VSS 0.3 | VCC + 0.3 VSS + 7.0 V3 |
V | All the pins must not exceed VSS + 7.0 V, excluding P00 to P07, P10 to P17, P20 to P25,P32 to P33 in MB89P955/PV950 |
| Output voltage | VO1 VO2 VO3 |
VSS 0.3 | VCC + 0.3 VSS + 7.0 V3 |
V | All the pins must not exceed Vss + 7.0 V, excluding P00 to P07, P10 to P17, P20 to P25,P32 to P33 inMB89P955/PV950 |
| "L" level output current | IOL | 10 | mA | Applicable to all pins except power supply pin. | |
| "L" level average output current | IOLAV | 4 | mA | Applicable to all pins excluding power supply pin. Specified as the average value in 1 hour. | |
| "L" level total maximum output current | IOL | 40 | mA | Peak value | |
| "H" level output current | IOH | 5 | mA | Applicable to all pins excluding power supply pin. | |
| "H" level average output current | IOHAV | 2 | mA | Applicable to all pins excluding power supply pin. Specified as the average value in 1 hour. | |
| "H" level total maximum output current | IOH | 10 | mA | ||
| Power consumption | PD | 200 | mA | ||
| Operating temperature | TA | 40 | +85 | °C | |
| Storage temperature | Tstg | 55 | +150 | °C | |
The MB89953 series of single-chip compact microcontroller using the F2MC*-8L family core which can operate at high-speeds and low voltages. They contain peripherals such as timers, UART, serial interfaces, external interrupts and a 168-pixel LCD controller/driver. It is best suited for use in LCD panels.