MC10EP16DR2

The MC10EP16DR2 is one member of the MC10EP16 family which is designed as the differential receiver that is functionally equivalent to the EL16 and LVEL16 devices with higher performance capabilities. This device provides a VBB output for either single-ended use or as a DC bias for AC coupling to the device within the package. The VBB pin should be used only as a bias for the EP16 as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01mf capacitor.

Features of the MC10EP16DR2 are:(1)160ps Propagation Delay; (2)High Bandwidth to 3 GHz Typical; (3)PECL mode: 3.0V to 5.5V VCC with VEE = 0V; (4)ECL mode: 0V VCC with VEE = -3.0V to -5.5V; (5)Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D; (6)Q Output will default LOW with inputs open or at VEE; (7)ESD Protection: 4KV HBM, 200V MM; (8)VBB Output; (9)New Differential Input Common Mode Range; (10)Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D; (11)Flammability Rating: UL-94 code V-0 @ 1/8'' Oxygen Index 28 to 34; (12)Transistor Count: 167 devices.

The absolute maximum ratings of the MC10EP16DR2 can be summarized as:(1)Power Supply (VCC = 0V):6.0 to 0 VDC;(2)Power Supply (VEE = 0V): 6.0 to 0 VDC;(3)Input Voltage (VCC = 0V, VI not more negative than VEE):6.0 to 0 VDC;(4)Input Voltage (VEE = 0V, VI not more positive than VCC): 6.0 to 0 VDC;(5)Output Current continuous: 50 mA;(6)Output Current surge: 100 mA;(7)VBB Sink/Source Current: ± 0.5 mA;(8)Operating Temperature Range:40 to +85 °C;(9)Storage Temperature:65 to +150 °C;(10)Thermal Resistance (JunctiontoCase): 41 to 44 ± 5% °C/W;(11)Solder Temperature (<2 to 3 Seconds: 245°C desired): 265 °C. If you want to know more information such as the electrical characteristics about the MC10EP16DR2, please download the datasheet in www.seekic.com or www.chinaicmart.com.