MC10H176FN

The MC10H176FN is designed as one kind of hex D master-slave flip-flops which contains six master slave type D flipflops with a common clock. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in clock frequency and propagation delay and no increase in powersupply current.

It has five features. (1)Power dissipation would be 460 mW typical. (2)Improved noise margin 150mV (over operating voltage and temperature range). (3)Voltage compensated. (4)MECL 10K compatible. (5)Propagation delay 1.7ns typical. Those are all the main features.

Some absolute maximum ratings have been concluded into several points as follow. (1)Its power supply Vcc=0 would be from -8.0V to 0V. (2)Its input voltage Vcc=0 would be from 0Vdc to Vee. (3)Its output current continuous would be 50mA. (4)Its output current surge would be 100mA. (5)Its operating temperature range would be from 0°C to 75°C. (6)Its storage temperature would be from -55°C to +165°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics are concluded as follow. (1)Its power supply current would be max 112mA. (2)Its input current high would be max 265uA for pins 5,6,7,10,11 and 12 and it would be max 420uA for pins 9. (3)Its input current low level would be min 0.5uA. (4)Its high output voltage would be min -0.98V and max -0.81V. (5)Its low output voltage would be min -1.95V and max -1.63V. (6)Its high input voltage would be min -1.13Vdc and max -0.81Vdc. (7)Its low input voltage would be min -1.95Vdc and it would be max -1.48Vdc. (8)Its propagation delay would be min 0.9ns and max 2.2ns. (9)Its setup time would be min 1.5ns. (10)Its hold time would be min 0.9ns. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!