MC13158F

The MC13158F is designed as a wideband IF subsystem that is designed for high performance data and analog applications. Excellent high frequency performance is achieved, with low cost, through the use of motorola's MOSAIC 1.5E RF bipolar process. has an onboard grounded collector VCO transistor that may be used with a fundamental or overtone crystal in single channel operation or with a PLL in multichannel operation.

MC13158F has eight features. (1)Designed for DECT applications. (2)1.8 to 6.0Vdc operating voltage. (3)Low power consumption in active and standby mode. (4)Greater than 600kHz detector bandwidth. (5)Data slicer with special off function. (6)Enable function for power down of battery operated systems. (7)RSSI dynamic range of 80dB minimum. (8)Low external component count. Those are all the main features.

Some absolute maximum ratings of MC13158F have been concluded into several points as follow. (1)Its power supply voltage would be 6.5V. (2)Its junction temperature would be 150°C. (3)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of MC13158F are concluded as follow. (1)Its total drain current would be min 2.5mA and typ 5.5mA and max 8.5mA at Vs=2.0V and would be min 3.5mA and typ 5.7mA and amx 8.5mA at Vs=3.0V and would be min 3.5mA and typ 6.0mA and max 9.5mA. (2)Its output current V18 LO data slicer enable (DS "on") would be min 2.0mA and typ 5.9mA. (3)Its output current, V18 HI data slicer enabled (DS "on") would be typ 0.1uA and max 1.0uA. (4)Its output current data slicer disabled (DS "off") would be typ 0.1uA and max 1.0uA. And so on. If you have any question or suggestion or want to know more information about MC13158F please visit our website and contact us for details. Thank you!