Purchase MCP4014, In-stock MCP4014 From SeekIC.
Part Number: MCP4014
Description: The MCP4011/2/3/4 devices are volatile, 6-bit Digital Potentiometers that can be configured as either ...
- Table of contents:
MCP4014
-
Suppliers
DataSheet
General Description
MCP4014 General Description
The MCP4011/2/3/4 devices are volatile, 6-bit Digital Potentiometers that can be configured as either a potentiometer or rheostat. The wiper setting is controlled through a simple Up/Down (U/D) serial interface.
MCP4014 Maximum Ratings
Absolute Maximum Ratings †
VDD................................................................................ 6.5V
CS and U/D inputs w.r.t VSS........................... -0.3V to 12.5V
A,B and W terminals w.r.t VSS................ -0.3V to VDD + 0.3V
Current at Input Pins ................................................±10 mA
Current at Supply Pins ..............................................±10 mA
Current at Potentiometer Pins ..................................±2.5 mA
Storage temperature .................................-65°C to +150°C
Ambient temp. with power applied ............-55°C to +125°C
ESD protection on all pins ........... 4 kV (HBM), 400V (MM)
Maximum Junction Temperature (TJ) . .........................+150°C
† Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied.Exposure to maximum rating conditions for extended periods may affect device reliability.
MCP4014 Features
` Volatile Digital Potentiometer in SOT-23, SOIC, MSOP and DFN packages
` 64 Taps: 63 Resistors with Taps to terminal A and terminal B
` Simple Up/Down (U/D) Protocol
` Power-on Recall of Default Wiper Setting
- Custom POR wiper settings available (contact factory)
` Resistance Values: 2.1 k, 5 k, 10 k or 50 k
` Low Tempco:
- Absolute (Rheostat): 50 ppm (0°C to 70°C typ.)
- Ratiometric (Potentiometer): 10 ppm (typ.)
` Low Wiper Resistance: 75 (typ.)
` High-Voltage Tolerant Digital Inputs: Up to 12.5V
` Low-Power Operation: 1 A Max Static Current
` Wide Operating Voltage Range:
- 1.8V to 5.5V - Device Operation
- 2.7V to 5.5V - Resistor Characteristics Specified
` Extended Temperature Range: -40°C to +125°C
` 64 Taps: 63 Resistors with Taps to terminal A and terminal B
` Simple Up/Down (U/D) Protocol
` Power-on Recall of Default Wiper Setting
- Custom POR wiper settings available (contact factory)
` Resistance Values: 2.1 k, 5 k, 10 k or 50 k
` Low Tempco:
- Absolute (Rheostat): 50 ppm (0°C to 70°C typ.)
- Ratiometric (Potentiometer): 10 ppm (typ.)
` Low Wiper Resistance: 75 (typ.)
` High-Voltage Tolerant Digital Inputs: Up to 12.5V
` Low-Power Operation: 1 A Max Static Current
` Wide Operating Voltage Range:
- 1.8V to 5.5V - Device Operation
- 2.7V to 5.5V - Resistor Characteristics Specified
` Extended Temperature Range: -40°C to +125°C
MCP4014 Typical Application
· Power Supply Trim and Calibration
· Mechanical Potentiometer Replacement in New Designs
· Instrumentation, Offset and Gain Adjust
MCP4014 Connection Diagram
MCP4014
PDF/DataSheet Download
- Datasheet: MCP4014
- File Size: 2633648 KB
- Manufacturer: MICROCHIP
- Click here to Download
- ·MCP100
- MICROCHIP [Microchip Technology]
- Microcontroller Supervisory Circuit with Push-Pull Output
- 227618 KB
- ·MCP100-485DI/TT
- Microchip Technology
- Analog IC
- 324141 KB
- ·MCP100-485HI/TT
- Microchip Technology
- Analog IC
- 299411 KB
- ·MCP100T-485I/TT
- MICROCHIP [Microchip Technology]
- Microcontroller Supervisory Circuit with Push-Pull Output
- 288386 KB
- ·MCP101
- MICROCHIP [Microchip Technology]
- Microcontroller Supervisory Circuit with Push-Pull Output
- 227618 KB
- ·MCP101T-485I/TT
- MICROCHIP [Microchip Technology]
- Microcontroller Supervisory Circuit with Push-Pull Output
- 288386 KB
- ·MCP102
- MICROCHIP
- Micropower Voltage Supervisors
- 419025 KB
- ·MCP102-195E/LB
- MICROCHIP [Microchip Technology]
- Micropower Voltage Supervisors
- 430716 KB
MCP4014 Relative Products
MCP4013T-503E/CH
IC DGTL POT 50K 1CH SOT23-6
MCP4013T-502E/CH
IC DGTL POT 5K 1CH SOT23-6
-
MCP4013T-202E/CH
IC DGTL POT 2.1K 1CH SOT23-6
-
MCP4013T-103E/CH
IC DGTL POT 10K 1CH SOT23-6
MCP4013
The MCP4013 devices are volatile, 6-bit (64 wiper steps) digital potentiometers that are programmed/reprogrammed through a simple up/down serial interface. The MCP4013 devices offer a variety of configurations simplifying design while minimizing cost, packag...
MCP4012T-503E/CH
IC DGTL POT 50K 1CH RHEO SOT23-6
Hotspot Suppliers Product
MC908AZ60ACFUE
Price: 0.1-0.1 USD
8-bit microcontroller unit, QFP, –0.3 to +6.0 V, 100 mA, M68HC08 Architecture, Clock Generator Mod...
FDS6681Z
Price: 0.05-1 USD
2.5W, MOSFET, 20A, PowerTrench process, 30V, SOP-8, Extended VGSS range
AQZ202
Price: 5-5.5 USD
22V, 3A, DIP, power photoMOS relay, with internal varistor, 50mA, High capacity
ADC85H-12
Price: 76.5-86.5 USD
12-bit, analog-to-digital converter, 32-pin DIP
HD74LS08P
Price: 1-2 USD
HD74LS08P - Quadruple 2-Input Positive AND Gates - Renesas Technology Corp
L4962A
Price: 0.1-1 USD
1.5A, power switching regulator, DIP-16, 50V, 15W, 16-lead Powerdip plastic package
CY7C1313TV18-250BZC
Price: 9.8-12 USD
18-Mb, SRAM, 4-Word Burst Architecture, 165-FBGA, CY7C1313TV18-250BZC, Cypress Semiconductor
7MBR75U4B120-50
Price: 68-70 USD
Power Integrated Module, 1200 V, 1.0 mA, 275 W, 75 A, 1.20 μs
LM324ADR
Price: 0.1-1 USD
quadruple operational amplifier, SOP, ±16 or 32 V, Common-Mode Input Voltage Range
CS5530A-UCE
Price: 2-2.5 USD
companion device, BGA, -0.5 to 5.5V
MAX1705EEE
Price: 1-1.5 USD
high-efficiency, low-noise, step-up DC-DC converter, QSOP16, -0.3V to 6V, 850mA Output, 1μA Shutdo...
TLP126
Price: 1-2 USD
mini flat coupler, sop, 50 mA, 150 mW, high CTR, 3750Vrms
