Purchase MH89728, In-stock MH89728 From SeekIC.
Part Number: MH89728
Description: The MH89728 and MH89726 are thick film hybrid devices which may be used to extend the operating range of the MT8972 (DN...
- Table of contents:
MH89728
-
Suppliers
DataSheet
General Description
MH89728 General Description
The MH89728 and MH89726 are thick film hybrid devices which may be used to extend the operating range of the MT8972 (DNIC). The hybrids combine signal equalization and amplification for the receive and transmit paths on each device.
The small size of these hybrids makes them suitable for line card or terminal use with the MT8972. The gain of the transmit signal may be adjusted through the use of an external resistor.
MH89728 Features
• Operates from single or dual power supply
• MH89726 extends transmission performance for the MT8972 (DNIC) at 160kbit/s line rate
• MH89728 extends transmission performance for the MT8972 (DNIC) at 80kbit/s line rate
• MH89726 and MH89728 are pin for pin compatible with each other
• Compact SIL package
• Over 6km loop range on 24 AWG
• MH89726 extends transmission performance for the MT8972 (DNIC) at 160kbit/s line rate
• MH89728 extends transmission performance for the MT8972 (DNIC) at 80kbit/s line rate
• MH89726 and MH89728 are pin for pin compatible with each other
• Compact SIL package
• Over 6km loop range on 24 AWG
MH89728 Typical Application
• Digital subscriber lines
• Digital PABX line cards and telephone sets
• High speed, limited distance modem
• ISDN U - Interface
• Digital PABX line cards and telephone sets
• High speed, limited distance modem
• ISDN U - Interface
MH89728 Connection Diagram
MH89728
PDF/DataSheet Download
- Datasheet: MH89728
- File Size: 121945 KB
- Manufacturer: MITEL [Mitel Networks Corporation]
- Click here to Download
- ·MH80625C
- MITEL [Mitel Networks Corporation]
- Protection SIP Preliminary Information
- 35412 KB
- ·MH80626C
- MITEL [Mitel Networks Corporation]
- Battery Feed/Protection SIP Preliminary Information
- 30527 KB
- ·MH8100
- MICRO-ELECTRONICS [Micro Electronics]
- COMPLEMENTARY EPITAXIAL TRANSISTORS FOR 3-5W AF OUTPUT
- 174322 KB
- ·MH88400
- MITEL [Mitel Networks Corporation]
- Line Interface Circuit Preliminary Information
- 123138 KB
- ·MH88400-1
- MITEL [Mitel Networks Corporation]
- Line Interface Circuit Preliminary Information
- 123138 KB
- ·MH88400-2
- MITEL [Mitel Networks Corporation]
- Line Interface Circuit Preliminary Information
- 123138 KB
- ·MH88400-3
- MITEL [Mitel Networks Corporation]
- Line Interface Circuit Preliminary Information
- 123138 KB
- ·MH88422
- MITEL [Mitel Networks Corporation]
- Line Interface Circuit Preliminary Information
- 124852 KB
MH89728 Relative Products
MH89726
The MH89728 and MH89726 are thick film hybrid devices which may be used to extend the operating range of the MT8972 (DNIC). The hybrids combine signal equalization and amplification for the receive and transmit paths on each device.The small size of these hy...
MH89626C
The MH89626C SLIC provides all of the functions required to interface 2-wire off premise subscriber loops to a serial TDM, PCM, switching network of a modern PBX. The MH89626C is manufactured using thick film hybrid technology which offers high voltage capab...
MH89625C
The Mitel MH89625C SLIC (Subscriber Line Interface Circuit) provides a complete interface between an off-premise telephone line and a digital switching system. All BORSCHT functions of Battery Feed, Overvoltage Protection, Ringing Feed, Line Supervision, Cod...
MH89101
The MH89101 is a thick film hybrid device which is used in conjunction with the MT8910 to perform two to four wire conversion and analog signal conditioning on the received 2B1Q signal.The signal conditioning is necessary to enable the DSLIC to interface to ...
MH88636-4
The Mitel MH88636-4 Central Office Trunk Interface circuit provides a complete analog and signalling link between audio switching equipment and a subscriber Line.The MH88636-4 is fabricated as a thick film hybrid technology for optimum circuit design and ver...
MH88634K
The Mitel MH88634K Central Office Trunk Interface circuit provides a complete audio and signalling link between audio switching equipment and a central office. The functions provided by the MH88634K include 2-4 Wire conversion, 600 Ohm input impedance and ne...
Hotspot Suppliers Product
HD74LS47P
Price: 0.5-0.8 USD
BCD-to-Seven-Segment Decoder / Driver (with 15 V Outputs) HD74LS47P
203X6
Price: 0.47-0.94 USD
203X6, SOP8, ON Semiconductor
FATC-10A-RED
Price: 0.1-3 USD
automotive fuse, replaceable mounting, 32.00 volts, 10.00 amps
B3F-4050
Price: 0.06-0.12 USD
Omron Electronics, Tactile & Jog Switches, DIP, 24 Volts, 1 Form A
BGY132
Price: 35-40 USD
BGY132 Philips Semiconductors / NXP Semiconductors VHF Amplifier Modules
SIL1160CTU
Price: 3.5-4.5 USD
SII1160CTU, QFP100, Silicon image
MC6850
Price: 2.3-2.5 USD
asynchronous communications interface adapter, DIP24, 1.0 Mbps, double buffered, -0.3 to 7.0V
AD7730LBRZ
Price: 11-14.5 USD
24-SOIC, analog front-end, –0.3 V to +7 V
STU2NK100Z
Price: 1.34-3.5 USD
N-channel, 1000 V, 6.25 Ω, 1.85 A, TO-251, DPAK, IPAK Zener-protected, SuperMESH Power MOSFET
TDA1905
Price: 0.1-2 USD
5W, audio amplifier, DIP
IR2184S
Price: 0.94-1.25 USD
half-bridge driver, 3.3V and 5V input logic compatible, 10 to 20V, 1.4A
SN74HC541NSR
Price: 0.15-0.25 USD
8BIT, 20SOP, SN74HC541NSR, –0.5 V to 7 V, 20 mA, octal buffer and line driver
