MIC5210-5.0BMM

Series: -
Regulator Topology: Positive Fixed
Voltage - Output: 5V
Current - Limit (Min): -
Mounting Type: Surface Mount
Operating Temperature: -40°C ~ 125°C
Current - Output: 150mA
Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package: 8-MSOP
Number of Regulators: 2
Packaging: Tube
Voltage - Input: 2.5 V ~ 16 V
Manufacturer: Micrel Inc
Voltage - Dropout (Typical): 0.165V @ 150mA


Features:

• Micrel Mini 8™ MSOP package
• Guaranteed 100mA outputs
• Low quiescent current
• Low dropout voltage
• Wide selection of output voltages
• Tight load and line regulation
• Low temperature coefficient
• Current and thermal limiting
• Reversed input polarity protection
• Zero off-mode current
• Logic-controlled electronic enable


Application

• Cellular telephones
• Laptop, notebook, and palmtop computers
• Battery powered equipment
• Bar code scanners
• SMPS post regulator/dc-to-dc modules
• High-efficiency linear power supplies Typical Application


Pinout




Specifications

Supply Input Voltage (V_IN) ............................ 20V to +20V
Enable Input Voltage (V_EN) ........................... 20V to +20V
Power Dissipation (P_D) ............................ Internally Limited
Storage Temperature Range ................... 60°C to +150°C
Lead Temperature (soldering, 5 sec.) ....................... 260°C


Description

The MIC5210 is a dual linear voltage regulator with very low dropout voltage (typically 10mV at light loads and 140mV at 100mA), very low ground current (225mA at 10mA output), and better than 3% initial accuracy. It also features individual logic-compatible enable/shutdown control inputs.

Designed especially for hand-held battery powered devices,the MIC5210 can be switched by a CMOS or TTL compatible logic signal, or the enable pin can be connected to the supply input for 3-terminal operation. When disabled, power consumption drops nearly to zero. Dropout ground current of MIC5210-5.0BMM is minimized to prolong battery life.

Key features of MIC5210-5.0BMM include current limiting, overtemperature shutdown,and protection against reversed battery.

The MIC5210 is available in 3.0V, 3.3V, 3.6V, 4.0V and 5.0V fixed voltage configurations. Other voltages are available;
contact Micrel for details.

Parameters:

Technical/Catalog Information	MIC5210-5.0BMM
Vendor	Micrel Inc
Category	Integrated Circuits (ICs)
Regulator Type	Multiple Output
Package / Case	8-MSOP, Micro8?, 8-uMAX, 8-uSOP,
Packaging	Tube
Regulator Topology	Positive Fixed
Current - Output	150mA
Voltage - Output	5V
Operating Temperature	-40°C ~ 125°C
Voltage - Input	2.5 ~ 16 V
Number of Regulators	2
Current - Limit (Min)	320mA
Current Short Circuit (Isc)	-
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	MIC5210 5 0BMM MIC521050BMM