MK2308S-1I

3.3 VOLT ZERO DELAY, LOW
The MK2308 is a low phase noise, high-speed PLL based, 8 output, low skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides eight low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. For normal operation as a zero delay buffer, any output clock is tied to the FBIN pin.

Clock outputs from 10 to 133 MHz

Zero input-output delay

Eight low skew (<200 ps) outputs

Device-to-device skew <700 ps

Full CMOS outputs with 25 mA output drive capability at TTL levels

5 V tolerant FBIN and CLKIN pins

Tri-state mode for board-level testing

Advanced, low power, sub-micron CMOS process

Operating voltage of 3.3 V

Packaged in 16-pin SOIC and TSSOP packages

Available in Pb (lead) free package (SOIC, commercial only)

Industrial and commercial temperature operation
Not recommended for new designs. Use 2308B.