MK5811SLFTR

LOW EMI CLOCK GENERATOR
The MK5811 generates a low EMI output clock from a clock or crystal input. The part is designed to dither a high emissions clock to lower EMI in consumer applications. Using IDT's proprietary mix of analog and digital Phase-Locked Loop (PLL) technology, the device spreads the frequency spectrum of the output, reducing the frequency amplitude peaks by several dB. The MK5811 offers both centered and down spread from a high speed clock input.
For different multiplier configurations, use the MK5812 (2x) or the MK5814 (4x).
IDT offers many other clocks for computers and computer peripherals. Consult IDT when you need to remove crystals and oscillators from your board.
The MK5811A is recommended for new designs.

Packaged in 8-pin SOIC

Available in Pb (lead) free package

Provides a spread spectrum output clock

Supports flat panel controllers

Accepts a clock or crystal input (provides same frequency dithered output)

Input frequency range of 4 to 32 MHz

Output frequency range of 4 to 32 MHz

1X Frequency Multiplication

Center and down spread

Peak reduction by 8 dB to 16 dB typical on 3rd through 19th odd harmonics

Low EMI feature can be disabled

Includes power down

Operating voltage of 3.3 V

Advanced, low-power CMOS process

Direct pin replacement for the MK1726-01 device

For different multiplier configurations, use the MK5812 (2x) or the MK5814 (4x).

The MK5811A is recommended for new designs.