MK6006GAH

• High capacity in smallest size
. 1.8 inch-type 2 platters accommodating formatted capacity of 60.0116GB
(MK6006GAH)/40.000GB(MK4006GAH),
1 platter accommodating formatted capacity of 30.0058GB(MK3006GAL).
. Slim ( MK3006GAL: 5 mm in height, MK6006GAH: 8mm in height) and light (MK3006GAL: 51 gram in
weight, MK6006GAH/MK4006GAH: 62 gram in weight) design.
• Fast access and fast transfer rate
  Quick spin up of Spindle Motor 3 sec.
  Average access time 15 msec enabled by optimized balance of a head actuator assembly and an efficiently
   designed magnet of rotary VCM.
  Bus transfer rate up to 100 megabytes per second and disk transfer 283 megabits maximum per
  second,(MK3006GAL/MK6006GAH),265 megabits maximum per second. (MK4006GAH)
  Read ahead cache and write cache enhancing system throughput.
• Intelligent Interface
  ATA-2/ATA-3/ATA-4/ATA-5/ATA-6 interface supported.
  Ultra100 supported.
  Quick address conversion in translation mode.
  Translation mode which enables any drive configuration.
  LBA (Logical Block Address) mode.
  Multi word DMA, Ultra-DMA modes and Advanced PIO mode supported.
• Data integrity
  Automatic retries and corrections for read errors.
  520 bits computer generated ECC polynomial with 10 bits symbol 24 burst on-the-fly error correction
capability.
• High reliability
  Powerful self- diagnostic capability.
  Shock detection with shock sensor circuit for high immunity against operating shock up to 4,900 m/s2 ( 500 G ).
  Automatic carriage lock secures heads on the ramp with high immunity against non operating shock up to 14,700 m/s2 (1,500G).
• Low power consumption
• Supply voltage: 3.3V

The MK3006GAL/MK4006GAH/MK6006GAH which is noted hereinafter as " MK3006GAL/MK4006GAH/MK6006GAH" or as " the drive " comprises a series of intelligent disk drives .

The drive features an ATA-2 / 3 / 4 / 5 / 6 interface embedded controller that requires a simplified adapter board for interfacing to an AT or AT compatible bus. The drives employ Winchester technology and a closed loop servo control system which have made high recording density of 149.6 M bit/mm2(96.5G bit/in2)(MK3006GAL/MK6006GAH), 131.7 M bit/mm2(85.0G bit/in2)(MK4006GAH)and average access time of 15 msec with highest reliability of 300,000 hours for MTTF (Mean Time to Failure) possible. The drive is distinctive for its small and light body.

The MK3006GAL/MK4006GAH/MK6006GAH consists of an HDA (Head Disk Assembly) and a printed circuit board. The HDA has a sealed module which contains a disk spindle assembly, a head actuator assembly and an air filtration system. This HDA adopts Winchester technology which enhances high reliability. The actuator is a rotary voice coil motor which enables high-speed access. The disk is driven directly by a DC spindle motor. Air filtration is provided by a high performance air filtration system using both breather and circulation filters.

The drive of the MK6006GAH provides a carriage lock mechanism which is activated automatically upon power down in order to prevent head/media from being damaged when it is not operating or under shipment.

The printed circuit board of the MK6006GAH which is set externally to the HDA and equipped with all the electric circuitry
necessary to operate the drive except the head drivers . The power supply and interface signal connectors
are mounted on the board. Only the head control IC's are located within the HDA. The circuitry perform the
following functions: Read/Write, Task File Control, Spindle Motor Control, Seek and Head Positioning Servo Control, Abnormal Condition Detection and Shock Sensor Control.