Features: Wide supply voltage range: 3V to 6VGuaranteed noise margin: 1VHigh noise immunity: 0.45 VCC (typ.)High segment sourcing current: 40 mA @ VCC - 1.6V, VCC = 5VInternal multiplexing circuitrySpecificationsVoltage at Any Output Pin GND- 0.3V to VCC + 0.3VVoltage at Any Input Pin GND - 0.3V t...
MM74C926: Features: Wide supply voltage range: 3V to 6VGuaranteed noise margin: 1VHigh noise immunity: 0.45 VCC (typ.)High segment sourcing current: 40 mA @ VCC - 1.6V, VCC = 5VInternal multiplexing circuitry...
floor Price/Ceiling Price
- Part Number:
- Supply Ability:
SeekIC Buyer Protection PLUS - newly updated for 2013!
- Escrow Protection.
- Guaranteed refunds.
- Secure payments.
- Learn more >>
Upload time: 2017/3/24
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Features: Wide supply voltage range: 3V to 15VGuaranteed noise margin: 1VHigh noise immunity: 0.45...
Features: Wide supply voltage range: 3V to 6VGuaranteed noise margin: 1VHigh noise immunity: 0.45 ...
Features: ` Typical propagation delay: 7 ns (tPHL), 12 ns (tPLH)` Fanout of 10 LS-TTL loads` Quies...
Wide supply voltage range: 3V to 6V
Guaranteed noise margin: 1V
High noise immunity: 0.45 VCC (typ.)
High segment sourcing current: 40 mA @ VCC - 1.6V, VCC = 5V
Internal multiplexing circuitry
Voltage at Any Output Pin GND- 0.3V to VCC + 0.3V
Voltage at Any Input Pin GND - 0.3V to +15V
Range (TA) -40°C to +85°C
Range -65°C to +150°C
Power Dissipation (PD)Refer to PD(MAX) vs TA Graph
OperatingVCC Range 3V to 6V
(Soldering, 10 seconds) 260°C
The MM74C925, MM74C926, MM74C927 and MM74C928 CMOS counters consist of a 4-digit counter, an internal output latch, NPN output sourcing drivers for a 7-segment display, and an internal multiplexing circuitry with four multiplexing outputs. The multiplexing circuit has its own free-running oscillator, and requires no external clock. The counters advance on negative edge of clock. A HIGH signal on the Reset input of MM74C926 will reset the counter to zero, and reset the carry-out LOW. A LOW signal on the Latch Enable input will latch the number in the counters into the internal output latches. A HIGH signal on Display Select input will select the number in the counter to be displayed; a LOW level signal on the Display Select of MM74C926 will select the number in the output latch to be displayed.
The MM74C925 is a 4-decade counter and has Latch Enable, Clock and Reset inputs.
The MM74C926 is like the MM74C925 except that it has a display select and a carry-out used for cascading counters. The carry-out signal goes HIGH at 6000, goes back LOW at 0000.
The MM74C927 is like the MM74C926 except the second most significant digit divides by 6 rather than 10. Thus, if the clock input frequency is 10 Hz, the display would read tenths of seconds and minutes (i.e., 9:59.9).
The MM74C928 is like the MM74C926 except the most significant digit divides by 2 rather than 10 and the carry-out is an overflow indicator which is HIGH at 2000, and it goes back LOW only when the counter is reset. Thus, this is a 3½-digit counter.
Customers Who Bought This Item Also Bought