MRF21045LS

The MRF21045LS has ten features.(1)typical 2-carrier W-CDMA performance for VDD = 28 volts, IDQ = 500 mA,f1 = 2135 MHz, f2 = 2145 MHz,channel bandwidth = 3.84 MHz,adjacent channels measured over 3.84 MHz bandwidth at f1 -5 MHz and f2 +5 MHz, distortion products measured over a 3.84 MHz bandwidth at f1 -10 MHz and f2 +10 MHz, Peak/Avg. = 8.3 dB @ 0.01% probability on CCDF.(2)internally matched, controlled Q, for ease of Use.(3)high gain, high efficiency and high linearity.(4)integrated ESD protection.(5)designed for maximum gain and insertion phase flatness.(6)capable of handling 5:1 VSWR, @ 28 Vdc, 2170 MHz,45 watts CW output power.(7)excellent thermal stability.(8)characterized with series equivalent largesignal impedance parameters.(9)low gold plating thickness on leads. L suffix indicates 40 Nominal.(10)in tape and reel. R3 suffix = 250 units per 32 mm, 13 inch reel.

MRF21045LS Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.

MRF21045LS Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.