MSR38DP

The Minotaur MSR38DP is a microprocessor-based, monitoring safety relay, with delayed, safety-rated, solid state outputs.

The inputs of the MSR38DP are the same as the MSR30. They can be connected to gate interlocks, e-stop devices or 4-wire safety mats. The gate interlocks and e-stops can be either single channel or dual channel normally-closed circuits.

The reset capability of the MSR38DP allows it to set up for manual or automatic start and restart.

The outputs include two delayed normally-open safety rated outputs that can be connected to loads up to 2A at 24V DC. These outputs of MSR38DP can be used to send a safety stop signal to a machine or manufacturing system. The delay is accomplished by the configuration of jumpers on the terminals. The delay of MSR38DP can be easily adjusted by reconfiguring the jumpers.

The MSR38DP also has one solid state normally-closed auxiliary output, which must only be used to indicate the status of the MSR38DP. The auxiliary output responds immediately to the change in input status; it is not delayed.