NC7SZ66M5X

The NC7SZ66M5X is kind of ultra high-speed (UHS) CMOS compatible single-pole/single-throw (SPST) bus switch. The device is organized as a 1-bit switch with a switch enable (OE) signal. When OE is HIGH, the switch is on and Port A is connected to Port B. When OE is LOW, the switch is open and a high-impedance state exists between the two ports. The LOW
On Resistance of the switch allows inputs to be connected to outputs with minimal propagation delay and without generating additional ground bounce noise. The device is available in 5-lead SOT23 package.

There are some features as follows: (1)space saving SOT23 package; (2)ultra small MicroPak. leadless package; (3)broad VCC Operating Range 1.65V5.5V; (4)Rail-to-rail signal handling; (5)5 switch connection between two ports; (6)minimal propagation delay through the switch; (7)low ICC; (8)zero bounce in flow-through mode; (9)control input compatible with CMOS input levels.

The following is about the absolute maximum ratings: (1)supply voltage (VCC): -0.5 to +7.0 V; (2)DC switch voltage (VS): -0.5 to VCC +0.5 V; (3)DC input voltage (VIN): -0.5 to +7.0 V; (4)DC input diode current (IIK) when VIN <0 V: -50 mA; (5)DC output (IOUT) sink current: 128 mA; (6)DC VCC/GND current (ICC/IGND): ±100 mA; (7)storage temperature range (TSTG): -65 to +150; (8)junction lead temperature under Bias (TJ): +150; (9)junction lead temperature (TL) (soldering, 10 seconds): +260; (10)power dissipation (PD) @ +85: 200 mW. Then is about the recommended operating conditions: (1)power supply operating (VCC): 1.65 to 5.5 V; (2)control input voltage (VIN): 0 to 5.5 V; (3)switch input voltage (VIN): 0 to VCC V; (4)switch output voltage (VOUT): 0 to VCC V; (5)input rise and fall time (tr, tf): 0 ns/V to 10 ns when control input; VCC=2.3 to 3.6 V and 0 ns/V to 5 ns when control input; VCC=4.5 to 5.5 V; (6)switch I/O: 0 ns/V to DC; (7)operating temperature (TA): -40 to +85; (8)thermal resistance (JA): 300/Watt.