OPT210 General Description
The OPT210 is a photodetector consisting of a high performance silicon photodiode and precision FETinput transimpedance amplifier integrated on a single monolithic chip. Output is an analog voltage proportional to light intensity.
The large 0.09" x 0.09" photodiode is operated at low bias voltage for low dark current and excellent linearity.
A novel photodiode anode bootstrap circuit reduces the effects of photodiode capacitance to extend bandwidth and reduces noise.
The integrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered with discrete designs such as leakage current errors, noise pick-up and gain peaking due to stray capacitance.
The OPT210 operates from ±2.25 to ±18V supplies and quiescent current is only 2mA. Available in a transparent 8-pin DIP, 8-lead surface-mount and 5-pin SIP, it is specified for 0° to 70 operation.
OPT210 Maximum Ratings
Supply Voltage ................................................................................... ±18V
Input Voltage Range (Common Pin) .................................................... ±VS
Output Short-Circuit (to ground) ............................................... Continuous
Operating Temperature: P, W ........................................... .25 to +85
Storage Temperature: P, W ........................................... ....25 to +85
Junction Temperature: P, W .............................................................. +85
Lead Temperature (soldering, 10s) ................................................ +300
(Vapor-Phase Soldering Not Recommended on Plastic Packages)
OPT210 Features
· BOOTSTRAP ANODE DRIVE: Extends Bandwidth: 900kHz (RF = 100KW) Reduces Noise
· LARGE PHOTODIODE: 0.09" x 0.09"
· HIGH RESPONSIVITY: 0.45A/W (650nm)
· EXCELLENT SPECTRAL RESPONSE
·WIDE SUPPLY RANGE: ±2.25 to ±18V
· TRANSPARENT DIP, SIP AND SURFACEMOUNT PACKAGES
OPT210 Typical Application
· BARCODE SCANNERS
· MEDICAL INSTRUMENTATION
·LABORATORY INSTRUMENTATION
· POSITION AND PROXIMITY DETECTORS
· PARTICLE DETECTORS
OPT210 Connection Diagram

- ·OPT101
- BURR-BROWN [Burr-Brown Corporation]
- MONOLITHIC PHOTODIODE AND SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER
- 169672 KB

- ·OPT101P
- BURR-BROWN [Burr-Brown Corporation]
- MONOLITHIC PHOTODIODE AND SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER
- 169672 KB

- ·OPT101W
- BURR-BROWN [Burr-Brown Corporation]
- MONOLITHIC PHOTODIODE AND SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER
- 169672 KB

- ·OPT-155A1H1A
- ETC [ETC]
- 155Mbps, 2Km, 1x9 SC Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
- 105314 KB

- ·OPT-155A2H1
- ETC [ETC]
- 155Mbps, 2Km, 1x9 SC Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
- 105314 KB

- ·OPT-155A2H1A
- ETC [ETC]
- 155Mbps, 2Km, 1x9 SC Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
- 105314 KB

- ·OPT202
- BURR-BROWN [Burr-Brown Corporation]
- PHOTODIODE WITH ON-CHIP AMPLIFIER
- 179880 KB

- ·OPT210P
- BURR-BROWN [Burr-Brown Corporation]
- MONOLITHIC PHOTODIODE AND AMPLIFIER 300kHz Bandwidth at RF = 1MW
- 121643 KB

Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All