P18TG-123R3E2:1M

Features:






Specifications






Description

      Here are some Electrical Specifications of P18TG-123R3E2:1M, when the Typical enviroment is at + 25° C, nominal input voltage, rated output current unless otherwise specified. P18TG-123R3E2:1M consists of the Input Specifications, Isolation Specifications, Output Specifications, General Specifications, Environmental Specifications, Physical Characteristics.
      Firstly, in the Input Specifications, voltage range 9 -18 VDC (12 VDC), 18 - 36 VDC (24 VDC) and 36 -72 VDC (48 VDC) and the filter is Pi Network. Sencondly, in the Isolation Specifications, rated voltage is 1500 Vdc, leakage current is 1 mA, resistance is 109 Ohm, capacitance is 120 pF typ. Thirdly, in the Output Specifications, voltage accuracy is +/- 1 % typ and the maxium is +/-2%. The maxium of the ripple and noise at 20 MHz BW is 60 mV p-p. If the short circuit protection or the continuous happens, it will restart automaticly. The maxium of line voltage regulation is +/- 0,5 %. The maxium of load voltage regulation is +/- 0,5 %. Temperature coefficient is +/- 0,02 % / °C. Fourthly, in the General Specifications, Efficiency is 70 % to 85 %, switching frequency is 250 KHz, typ. Fifthly, in the Environmental Specifications, ambient operating temperature is -40°C to +85°C, storage temperature is - 55 °C to + 125 °C, derating could be seen in the graph, humidity is Up to 90 %, it has non condensing but has cooling Free air convection. Finally, in the Physical Characteristics, dimensions is 31,75 x 20,32 x 10,16 mm, or 1,25 x 0,80 x 0,40 inches, Weight is 19,0 g, case material has nickel coated copper.