PS9611

Maximum Forward Diode Voltage :
Maximum Reverse Diode Voltage :
Maximum Input Diode Current :
Maximum Power Dissipation :
Maximum Operating Temperature :
Minimum Operating Temperature :
Package / Case :
Current Transfer Ratio :
Packaging : Tube
Maximum Baud Rate : 10 MBps


Features:

• High common mode transient immunity (CM_H, CM_L = ±10 kV/ ms TYP.)
• High-speed response (t_PHL, t_PLH = 30 ns TYP.)
• Pulse width distortion (|t_PHL - t_PLH| = 3 ns TYP.)
• Totem-pole output (No pull-up resistor required)
• Ordering number of taping product: PS9611L-E3, E4: 1 000 pcs/reel


Application

• Computer and peripheral manufactures
• Measurement equipment
• PDP


Pinout




Specifications

PARAMETERS		SYMBOLS	RATINGS	UNITS
Diode	Forward Current	IF	30	mA
	Reverse Voltage	VR	3.0	V
Detector	Reverse Voltage	VCC	7	V
	Output Voltage	VO	7	V
	High Level Output Current*1	IOH	-5	mA
	Low Level Output Current*1	IOL	25	mA
	Power Dissipation*1	PC	150	mW
Isolation Voltage*2		BV	3750	Vr.m.s.
Operating Ambient Temperature		TA	−40 to +85
Storage Temperature		Tstg	−55 to +125

*1 T_A = -40 to +85
*2 AC voltage for 1 minute at T_A = 25, RH = 60 % between input and output.


Description

The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.

The PS9611 is in a plastic DIP (Dual In-line Package) and the PS9611L is lead bending type (Gull-wing) for surface mounting.