PTD-1A

The PTD-1A is designed as programmable trigger delay which provides up to 16 channels of programmable delay from a single trigger. The time resolution os 10ns with a maximum delay of 99.99s. Programming may be done manually from the front panel or with an RS232C interface from a computer. The delay accuracy is ±2ns + ±0.5% of setting and the jitter is <1 ns RMS. The input trigger circuitry provides for variable level and slope selection. Any number of delay cards from 1 to 16 may be installed in the PTD-1A chassis. Cards may be added at any time (up to 16) with no hardware changes.

Some important specifications of PTD-1A  have been concluded into several points as follow. The first one is about its power which would be 115/220V, 50/60Hz, 1A/0.5A (specify 115V or 220V operation). The next one is about its temperature which would be from 0°C to 50°C. The next one is about its input which would be ±5V for max signal and would be ±500V, 20-ns pulse for protection. The next one is about its number of channels which would be from 1 to 16.

And there are some other specifications about PTD-1A . The first one is about its delay resolution which would be 10ns. The next one is about its maximum delay which would be 99.99s. The next one is about its delay error which would be ±2ns ±0.5% of setting. The next one is about its delay jitter which would be less than 1 ns RMS. The next one is about its output risetime which would be less than 10ns. The next one is about its size which would be standard (19-inch) rack chassis and it would be 48.3 cm for width and would be 22.2 cm for height and it would be 45.7 cm for depth. And so on. For more information please contact us.