REJ09B0329

Features:

• General-register architecture
   - Sixteen 16-bit general registers (also usable as sixteen 8-bit registers or eight 32-bit registers)
• High-speed operation suitable for real-time control
   - Maximum operating frequency: 10 MHz/4 V to 5.5 V
   - High-speed arithmetic operations
       8/16/32-bit register-register add/subtract: 100 ns (10-MHz operation)
      16 * 16-bit register-register multiply: 2000 ns (10-MHz operation)
      32 ÷ 16-bit register-register divide: 2000 ns (10-MHz operation)
• Instruction set suitable for high-speed operation
   - Sixty-five basic instructions
   - 8/16/32-bit transfer/arithmetic and logic instructions
   - Unsigned/signed multiply and divide instructions
   - Powerful bit-manipulation instructions
• CPU operating modes
   - Advanced mode: 16-Mbyte address space
• Seven types of timer are incorporated
   - Timer A
• 8-bit interval timer
• Clock source can be selected among 8 types of internal clock of which frequencies are divided from the
   system clock () and subclock (SUB)
• Functions as clock time base by subclock input
   - Timer B
• Functions as 8-bit interval timer or reload timer
• Clock source can be selected among 7 types of internal clock or external event input
   - Timer J
• Functions as two 8-bit down counters or one 16-bit down counter (reload timer/event counter timer/timer
  output, etc., 5 types of operation modes)
• Remote controlled transmit function
• Take up/Supply Reel Pulse Frequency division





Pinout




Specifications

Item	Symbol	Value	Unit
Power supply voltage	Vcc	−0.3 to +7.0	V
Input voltage (ports other than port 0)	Vin	−0.3 to Vcc +0.3	V
Input voltage (port 0)	Vin	−0.3 to AVcc +0.3	V
A/D converter power supply voltage	AVcc	−0.3 to +7.0	V
A/D converter input voltage	AVin	−0.3 to AVcc +0.3	V
Servo power supply voltage	SVcc	−0.3 to +7.0	V
Servo amplifier input voltage	Vin	−0.3 to SVcc +0.3	V
OSD power supply voltage	OVcc	−0.3 to +7.0	V
Operating temperature	Topr	−20 to +75
Operating temperature (At Flash memory program/erase)	Topr	0 to +75
Operating temperature	Tstr	−55 to +125

Notes: 1. Permanent damage may occur to the chip if absolute maximum ratings are exceeded. Normal
               operation should be under the conditions specified in Electrical Characteristics. Exceeding these
               values can result in incorrect operation and reduced reliability.
           2. All voltages are relative to Vss = SVss = OVss = AVss = 0.0 V.




Description

The H8S/2199R Group comprises microcomputers (MCUs) built around the H8S/2000 CPU, adopting Renesas Technology proprietary architecture, and equipped with on-chip supporting modules.

The H8S/2000 has an internal 32-bit architecture, is provided with sixteen 16-bit general registers and a concise, optimized instruction set designed for high-speed operation, and can address a 16- Mbyte linear address space.

The H8S/2199R Group is equipped with a digital servo circuit, sync separator, OSD, data slicer, ROM, RAM, seven types of timers, three types of PWM, two types of serial communication interface, an I2C bus interface, A/D converter, and I/O port as on-chip supporting modules.

The on-chip ROM is either flash memory (F-ZTAT™*) or mask ROM, with a capacity of 256, 128, 112, 96, or 80 kbytes. ROM is connected to the CPU via a 16-bit data bus, enabling both byte and word data to be accessed in one state. Instruction fetching has been speeded up, and processing speed increased.

Using the H8S/2199R Group can implement a system suitable for VTR control. This manual describes the H8S/2199R Group hardware. For details on instructions, see the H8S/2600 and H8S/2000 Series Software Manual.