RX3A

Features:

Frequencies available as standard: 869.85MHz, 914.5MHz
CE certified by independent Notified Body
Verified to comply with Radio standard EN 300 220-3 by accredited Test Laboratory
Verified to comply with EMC standard EN 301 489-3 by accredited Test Laboratory
North American version conforms to FCC part 15.249
Data rates up to 64kbps
Fully screened




Specifications

Operating temperature -20°C to +70°C
Storage temperature -40°C to +100°C
TX3A
Vcc (pin 5) -0.3V to +16V
TXD (pin 7) ±7V
En (pin 4) -0.3V to +Vcc V
RF OUT (pin 2) ±50V DC, +10dBm RF
RX3A
Vcc, RXD (pins 7,9)-0.3V to +16V
En (pins 4) -0.3V to +Vcc V
RSSI, AF (pins 5, 8) -0.3V to +3V
RF IN (pin 1) ±50V DC, +10dBm RF




Description

Available for operation in the 868-870MHz band in Europe and the 902-928MHz band in North America, both modules combine full screening with internal filtering to ensure EMC compliance by minimising spurious radiation and susceptibility.

The TX3A transmitter module uses a frequency modulated crystal-locked PLL and operates between 2.2V and 16V at a current of 7.5mA nominal. At 3V supply it delivers nominally 0dBm (1mW) RF output. The SIL style TX3A measures 32 x 12 x 3.8 mm, excluding pins.

The RX3A module is a single conversion FM superhet receiver capable of handling data rates of up to 64kbps. It will operate from a supply of 2.7V to 16V and draws 11mA when receiving.

The RX3 features a fast power-up time for effective duty cycle power saving and a signal strength (RSSI) output with
60dB of range. Full screening and a SAW front-end filter give good immunity to interference. The SIL style RX3A measures 48 x 17.5 x 4.5 mm, excluding pins.