Features: SpecificationsDescription The RZM series is +105 high frequency radial lead aluminum electrolytic capacitors. They are designed for all applications including switching power supplies.RZM series haveseven features. The first one is that they are up to 3,000 Hrs. of load life at +105°C an...
RZM series: Features: SpecificationsDescription The RZM series is +105 high frequency radial lead aluminum electrolytic capacitors. They are designed for all applications including switching power supplies.RZM ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The RZM series is +105 high frequency radial lead aluminum electrolytic capacitors. They are designed for all applications including switching power supplies.
RZM series have seven features. The first one is that they are up to 3,000 Hrs. of load life at +105°C and at full rated voltage and ripple current. The second one is that of low impedance. The third one is that of low ESR. The forth one is the capacitance range of 47 F to 15,000 F. The fifth one is the voltage range of 6.3 WVDC to 50 WVDC. The sixth one is that of 100 kHz operating frequency range. The last one is that of solvent tolerant end seals standard.
There are several specifications about the RZM series. The capacitance tolerance is ±20% at 120Hz, 20. The operating temperature range is -55 to +105. The dissipation factor at 120Hz and 20 is respectively 0.28, 0.22, 0.18, 0.16, 0.14 and 0.12 responsible to 6.3, 10, 16, 25, 35 and 50WVDC. The leakage current under 50 WVDC within 1 minute is 0.03 CV. During the load life of 2000 hours at +105 with rated voltage and with ripple current, Case dia.(5.0, 6.3), or of 3000 hours at +105°C with rated voltage and with ripple current, Case dia.(8.0 and larger), the capacitance change is 20% of initial measured value. The dissipation factor is 200% of initial specified value. The Leakage current is initial specified value. The shelf life units will meet load life specifications in 1,000 hours at +105°C with no voltage applied.