S14095G

The S14095G is designed as one member of the S14 series which are general purpose LP filters. This range of 7-pole Elliptical Function Low Pass Filters is intended for bandwidth limitation with minimal distortion of the transmitted signal. The filters are corrected for Group Delay distortion over approx. 92% of the passband and for loss distortion over the entire passband. Degradation of a composite video signal is minimal when a 4.5 MHz or 5.5 MHz filter is selected for a 525 or 625 line T.V. system. The filters may be used for antialiasing in A-D and D-A systems.

Some important electrical characteristics of the S14095G are concluded into several points as follow. (1)Its end of passband would be 9.5MHz. (2)Its start of stopband would be 13.2MHz. (3)Its group delay ripple would be 10ns. (4)Its delay time would be 165ns. And so on.

Also some other important data of the S14095G are concluded into several points as follow. (1)Its impedance would be 75 ohms. (2)Its stopband attenuation wrt 100 kHz would have the minimum value of 40dB. (3)Its insertion Loss at 100kHz would have the maximum value of 1.3dB. (4)Its amplitude ripple in passband would have the maximum value of 0.2dB. It should be noted that video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above. (5)Its pulse and bar: K-rating would have the maximum value of 0.5%. (6)Its luminance or chrominance gain inequality (20T) would have the maximum value of 3%. (7)Its luminance or chrominance delay inequality (20T) would have the maximum value of 10ns. (8)Its aqueous washable would be yes. (9)Its package  would be DR00014A. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion please visit our website and contact us for details about the S14095G. Thank you!