S25FL016A0LMFI011

Access Time :
Timing Type :
Supply Voltage - Max : 3.6 V
Supply Voltage - Min : 2.7 V
Mounting Style : SMD/SMT
Operating Temperature : + 85 C
Packaging : Tube
Architecture : Uniform
Memory Type : NOR
Interface Type : SPI Serial
Memory Size : 16 Mbit
Data Bus Width : 1 bit
Package / Case : SO-8
Maximum Operating Current : 28 mA


Pinout




Description

The S25FL016A0LMFI011 is designed as one kind of 16 megabit CMOS 3.0 volt flash memory with 50MHz SPI (serial peripheral interface) Bus.It is enabled and in the Active Power mode when Chip Select (CS#) is Low. When CS# is high, the device is disabled, but may still be in the Active Power mode until all program, erase, and Write Status Register operations have completed.

The S25FL016A0LMFI011 is enabled and in the Active Power mode when Chip Select (CS#) is Low. When CS# is high, the device is disabled, but may still be in the Active Power mode until all program, erase, and Write Status Register operations have completed.

The distinctive characteristics of the S25FL016A0LMFI011 can be summarized as:(1)full voltage range:2.7 to 3.6 V read and program operations;(2)thirty-two sectors with 512 Kb each;(3)page program (up to 256 bytes) in 1.4 ms (typical);(4)0.5 s typical sector erase time;(5)10 s typical bulk erase time;(6)100,000 cycles per sector typical;(7)JEDEC standard two-byte electronic signature;(8)RES command one-byte electronic signature for backward compa-tibility;(9)SPI Bus Compatible Serial Interface.If you want to know more information about the S25FL016A0LMFI011,please download the datasheet in www.seekic.com or www.chinaicmart.com .