This S6500P is power factor correction controller using a discontinues conduction mode of boost converter. Especially, it is optimized for electronic ballasts which prevent abnormal functions in load runaway and feedback loop fault conditions and low power a...
This S6500 is power factor correction controller using a discontinues conduction mode of boost converter. Especially, it is optimized for electronic ballasts which prevent abnormal functions in load runaway and feedback loop fault conditions an...
S6428-01, S6429-01 and S6430-01 are color sensors designed to respectively detect monochromatic colors of blue (p=460 nm), green (p=540 nm) and red (p=660 nm).S7505-01 use a 3-channel (RGB) photodiode having blue, green and red sensitivities, and is molded i...
The S642-X is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. T...
S6428-01, S6429-01 and S6430-01 are color sensors designed to respectively detect monochromatic colors of blue (p=460 nm), green (p=540 nm) and red (p=660 nm).S7505-01 use a 3-channel (RGB) photodiode having blue, green and red sensitivities, and is molded i...
S6428-01, S6429-01 and S6430-01 are color sensors designed to respectively detect monochromatic colors of blue (p=460 nm), green (p=540 nm) and red (p=660 nm).S7505-01 use a 3-channel (RGB) photodiode having blue, green and red sensitivities, and is molded i...