S6B0718

Features:

`Driver Output Circuits
   - 81 common outputs / 104 segment outputs
   - Various partial display
   - Partial window moving & data scrolling
`On-chip Display Data RAM
   - Capacity: 89 x 104 = 9,256 bits
   - Bit data "1": a dot of display is illuminated.
   - Bit data "0": a dot of display is not illuminated.
`Microprocessor Interface
   - 8-bit parallel bi-directional interface with 6800-series or 8080-series
   - Serial interface (only write operation) available
`On-chip Low Power Analog Circuit
   - On-chip oscillator circuit
   - Voltage converter (x3, x4, x5 or x6)
   - Voltage regulator (temperature coefficient: -0.05%/°C or external input)
   - On-chip electronic contrast control function (64 steps)
   - Voltage follower (LCD bias: 1/4 to 1/11)
`Operating Voltage Range
   - Supply voltage (V<sub>DD</sub>): 2.4 to 3.6 V
   - LCD driving voltage (V<sub>LCD</sub> = V0 - V<sub>SS</sub>): 4.0 to 15.0 V
`Low power Consumption
   - 150  A Max. (V_DD = 3V, x5 boosting, V0 = 12V, internal power supply on and display OFF)
   - 15  A Max. (during power save [standby] mode)
`Package Type
   - Gold bumped chip or TCP


Specifications

Parameter	Symbol	Rating	Unit
Supply voltage range	VDD	- 0.3 ~ + 7.0	V
	V0, VOUT	+ 0.3 ~ + 17.0	V
	V1, V2, V3, V4	+ 0.3 ~ V0	V
External reference voltage	VEXT	+ 0.3 ~ VDD
Input voltage range	VIN	- 0.3 ~ VDD + 0.3	V
Operating temperature range	TOPR	- 40 ~ + 85
Storage temperature range	TSTR	- 55 ~ + 125

NOTES:
1. VDD, V0, VOUT, V1 to V4, VEXT and VCI are based on VSS = 0V.
2. Voltage VOUT V0 V1 V2 V3 V4 VSS must always be satisfied.
3. If supply voltage exceeds its absolute maximum range, this LSI may be damaged permanently.
It is desirable to use this LSI under electrical characteristic conditions during general operation.
Otherwise, this LSI may malfunction or reduced LSI reliability may result.


Description

The S6B0718 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 81 common nd 104 segment driver circuits. This chip is connected directly to a microprocessor, accepts serial or 8-bit parallel display data and stores in an on-chip display data RAM of 89 x 104 bits. It provides a highly flexible display section due to 1-to-1 correspondence between on-chip display data RAM bits and LCD panel pixels. And it performs display data RAM read/write operation with no externally operating clock to minimize power consumption. In addition, because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.