SB860F

The SB860F is designed as 8.0A isolation schottky barrier rectifier.

SB860F has eight features. (1) Plastic package has underwriters laboratory. (2) Flammabity classification 94V-O utizing. (3) Flame resardant epoxy molding compound. (4) Exceeds environmental standards of MIL-S-19500/228. (5) Low power loss, high efficiency. (6) Low forward voltage, high current capabity. (7) High surge capacity. (8) For use in low voltage, high frequency inverters, free wheeling and polarity protection applications. That are all the main features.

Some SB860F absolute maximum ratings and electrical characteristics have been concluded into several points as follow with conditiond of Ta=25°C unless other specified, single phase, half wave, 60Hz, resistive or inductive load, for capacitive load, derate current by 20%. (1) Its peak repetitive reverse voltage would be 60V. (2) Its working peak reverse voltage would be 60V. (3) Its DC blocking voltage would be 60V. (4) Its RMS reverse voltage would be 42V. (5) Its average rectified output current would be 8.0A. (6) Its non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) would be 150A. (7) Its forward voltage is 0.75V. (8) Its peak reverse current would be 0.5mA and at rated DC blocking voltage at 100°C would be 50mA. (9) Its typcal junction capacitance (measured at 1.0MHz and applied reverse voltage of 4.0V DC) would be 700pF. (10) Its typical thermal resistance junction to case (therminal resistance junction to case mounted on heatsink) would be 6.9K/W. (11) Its operating and storage temperature range would be from -65°C to +150°C. That are all the main ratings.

Also some mechanical data about SB860F. (1) Its case is ITO-220A full molded plastic. (2) Its terminals plated leads solderable per MIL-STD-202, method 208. (3) weight is 2.24 grams (approx.). (4) Its mounting position is any. (5) Its marking is its type number. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!